Nokia 3125 manual Receive data or fax calls, Make calls, Data transfer

Make calls

After you have saved your calling card information in your phone, you can make a call using your calling card.

1.At the standby mode, select Menu > Settings > Call settings > Calling card.

2.Enter your lock code, and press OK. (See Lock code, 54 for more information.)

3.Scroll to the calling card of your choice, select Options > Select > OK.

4.Press the End key to return to the standby mode; then enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call.

See your calling card for instructions.

5.Press and hold the Talk key for a few seconds until Card call is displayed.

6.When you hear the tone or system message, press OK.

Receive data or fax calls

Data or fax calls is a network service. See Network services, ix for more information.

If your wireless service provider supports this feature, you can set up the phone to send or receive data or

S e t t i n g s ( M e n u 5 )

fax calls when a terminal, such as a PDA or PC, is connected.

For better performance during data calls, place the phone on a stationary surface. Do not move the phone by holding it in your hand during a data call.

Note: For more information on connectivity, refer to the PC/PDA Connectivity Guide. The PC/PDA Connectivity Guide can be downloaded from the Nokia website at

http://www.nokia- asia.com/.

1.At the standby mode, select Menu > Settings > Call settings > Data/fax calls > Incoming data/ fax call > Normal, Data calls only, or Fax calls only.

Normal—The phone receives incoming calls as usual.

Data calls only—The phone receives only data calls.

Fax calls only—The phone receives only fax calls.

2.When you are finished receiving the fax or data call, repeat step 1 and select Normal.

Data transfer

You can view the transmission speed when sending or receiving data or fax calls.

Copyright © 2004 Nokia. All rights reserved. 47