Chapter 2
Using the Private Handsfree Headset
When the Private Handsfree Headset is plugged into the phone, you can have a phone conversation without holding the phone to your ear. The other person’s voice is heard through the Private Handsfree Headset’s earpiece. When you speak, your voice is picked up by the Private Handsfree Headset’s microphone.
Note: Before attaching the Private Handsfree Headset, remove the plug from the headset/TTY connector at the bottom left side of your phone. Store the plug in a safe place so you will be able to cover the connector when necessary.
Attach the Private Handsfree Headset to your phone as shown.
1Securely plug the Private Handsfree Headset connector into the side of the phone. This will automatically disable the speaker and microphone in the phone.
2Attach the Private Handsfree Headset clip to your clothes.
3Insert the earpiece into your ear.
4During conversation, increase or decrease volume to a comfortable
level by pressing 
or 
on the phone’s center navigation key.
5The microphone picks up your voice from its hanging position.
Note: Once the Private Handsfree Headset is connected, you can customize the ring volume, key volume, and voice volume settings for handsfree use. Ring volume and key volume can be changed in the Tone Settings menu. Voice volume can be customized during conversation as indicated above. When you disconnect the Private Handsfree Headset, your phone will go back to the settings programmed for standard handheld use.
Caution: The use of an ear insert device while driving may violate the laws of some states/provinces. Be sure to check applicable state/provincial laws before using this device.
Getting Started 15