Sony MDS-JE630 Section Test Mode, Precautions for USE of Test Mode, Setting the Test Mode

Page 17

SECTION 4

TEST MODE

1. PRECAUTIONS FOR USE OF TEST MODE

• As loading related operations will be performed regardless of the test mode operations being performed, be sure to check that the disc is stopped before setting and removing it.

Even if the [ÊÊÊÊÊEJECT]¤ button is pressed while the disc is rotating during continuous playback, continuous recording, etc., the disc will not stop rotating.

Therefore, it will be ejected while rotating.

Be sure to press the [ÊÊÊÊÊEJECT]¤ button after pressing the [MENU/NO] button and the rotation of disc is stopped.

1-1. Recording laser emission mode and operating buttons

•Continuous recording mode (CREC MODE)

•Laser power check mode (LDPWR CHECK)

•Laser power adjustment mode (LDPWR ADJUS)

•Traverse (MO) check (EF MO CHECK)

•Traverse (MO) adjustment (EF MO ADJUS)

•When pressing the [RECÊÊÊÊ]r button.

2. SETTING THE TEST MODE

The following are two methods of entering the test mode.

Procedure 1: While pressing the [ÊÊÊÊÊÊÊÊAMSÊÊÊÊÊÊÊÊ]- ± knob and [ÊÊ]p button, connect the power plug to an outlet, and release the [ÊÊÊÊÊÊÊÊAMSÊÊÊÊÊÊÊÊ]- ± knob and [ÊÊ]p button.

When the test mode is set, “[Check]” will be displayed. Turn the [ÊÊÊÊÊÊÊÊAMSÊÊÊÊÊÊÊÊ]- ± knob switches between the following four groups; ···Nn[Check] Nn[Adjust] Nn[Service] Nn[Develop] Nn···.

Procedure 2: While pressing the [ÊÊÊÊÊÊÊÊAMSÊÊÊÊÊÊÊÊ]- ± knob, connect the power plug to the outlet and release the [ÊÊÊÊÊÊÊÊAMSÊÊÊÊÊÊÊÊ]- ± knob. When the test mode is set, “TEMP CHECK” will be displayed. By setting the test mode using this method, only the “Check” group of method 1 can be executed.

3. RELEASING THE TEST MODE

Press the [REPEAT] button. The disc is ejected when loaded, and “Standby” display blinks, and becomes STANDBY state.

4. BASIC OPERATIONS OF THE TEST MODE

All operations are performed using the [ÊÊÊÊÊÊÊÊAMSÊÊÊÊÊÊÊÊ]- ± knob, [YES] button, and [MENU/NO] button. The functions of these buttons are as follows.

Function name

Function

 

 

- AMS ± knob

Changes parameters and modes

YES button

Proceeds onto the next step. Finalizes input.

 

 

MENU/NO button

Returns to previous step. Stops operations.

 

 

– 17 –

Page 16 Page 18
Image 17
Page 16 Page 18
Contents MDS-JE520 SpecificationsMDM-5D MBU-5DSELF-DIAGNOSIS Function Items of Error History Mode Items and Contents Section Servicing Notes Table of ContentsDiagrams Flexible Circuit Board Repairing IOP JIG for Checking BD Board WaveformRecord Procedure Criteria for Determination Measure if unsatisfactory Checks Prior to Parts Replacement and AdjustmentsProcedure Retry Cause Display ModeHexadecimal nBinary Conversion Table Front Panel Rear Panel Section GeneralLocation of Controls Page Front Panel Section Section DisassemblyCase Mechanism Deck Section MDM-5D Main BoardBase Unit MBU-5D, BD Board Slider CAMSW BOARD, Loading Motor M103 Precautions for USE of Test Mode Section Test ModeSetting the Test Mode Releasing the Test ModeDisplay Contents Mark Group Selecting the Test ModeNon-Volatile Memory Mode EEP Mode Operating the Continuous Playback ModeMID OUTFunctions of Other Buttons Test Mode DisplaysMeanings of Other Displays Parts Replacement and Adjustment Section Electrical AdjustmentsPrecautions for USE of Optical PICK-UP KMS-260A Precautions for Checking Laser Diode EmissionPrecautions for Adjustments Laser power meterLaser Power Check Temperature Compensation Offset CheckCheck Prior to Repairs Traverse CheckCD Error Rate Check Play Check MO Error Rate CheckFocus Bias Check Self-Recording/playback CheckTemperature Compensation Offset Adjustment Initial Setting of Adjustment ValueLaser Power Adjustment Recording and Displaying the IOP InformationTraverse Adjustment Focus Bias Adjustment Auto Gain Control Output Level Adjustment Error Rate CheckCD Auto Gain Control Output Level Adjustment MO Auto Gain Control Output Level AdjustmentAdjustment Location Block Diagram Servo Section Section Diagrams∙ Signal Path MDS-JE630REC Analog Block Diagram Main SectionPlay Analog OUT Circuit Boards Location Semiconductor Location Printed Wiring Board BD BoardSee page 36 for Circuit Boards Location MDS-JE630 43 for Waveforms. See page 56 for IC Block Diagrams Schematic Diagram BD Board 2/2 SeePrinted Wiring Board SW Board Schematic Diagram SW BoardWaveforms BD Board Main Board36 for Circuit Boards Location Semiconductor Location Printed Wiring Board Main Board SeeSchematic Diagram Main Board 1/2 See page 43 for Waveforms Line with mark !are critical for safety Ref. No Location D757 IC761 IC771 Q757 Q781 Q782 Schematic Diagram Panel Section See page 43 for Waveform IC152 BH6511FS-E2 IC Block Diagrams BD Board IC101IC121 CXD2656R IC471 LB1641 Main Board IC310 M5293L IC431 LA5632IC321 AK4524 IC PIN Function Description Srdt XlatSens XrstXWE XrasAsyo AsyiSfdr SrdrSprd SpfdByte AderCnvss RSTChack STBLdin LD-LOWSctx SCLClock SET0 Clock SET1Chassis Section Section Exploded Views17 #1 12 A-4724-696-A Main BOARD, Complete67 A-4724-697-A KEY SW BOARD, Complete 65 A-4724-698-A Display BOARD, Complete216 207 203 222 223 225 202 201 Mechanism Section226 206 204 209 4-988-466-21 Spring ELECTROSTATIC, LeafBase Unit Section MBU-5D Section Electrical Parts List Display Display HP KEY KEY SW KEY SW Main TC74HCU04AP Ground PlateGP1F38R Digital in OPT1 GP1F38R Digital in OPT2Line Filter Ferrite Bead InductorMain Power SW SW MANUAL, Instruction ENGLISH, French Accessories & Packing MaterialsCORD, Connection Audio
Related manuals
Manual 61 pages 6.43 Kb

MDS-JE630 specifications

The Sony MDS-JE630 is a compact and versatile MiniDisc recorder that was launched in the late 1990s, showcasing Sony's commitment to portable digital audio technology. Renowned for its superior sound quality, the MDS-JE630 is an exceptional choice for audiophiles and professionals alike, offering a user-friendly interface and a range of advanced features.

One of the main highlights of the MDS-JE630 is its MDLP (MiniDisc Long Play) technology, which allows for extended recording time without sacrificing audio quality. This feature enables users to record up to 148 minutes of stereo sound on a single MiniDisc, making it an invaluable tool for those requiring longer recording sessions, such as musicians or radio broadcasters.

The MDS-JE630 is equipped with ATRAC (Adaptive Transform Acoustic Coding) compression algorithms, ensuring that audio files retain high fidelity even when compressed. The device features a 20-bit digital-to-analog converter, providing remarkable sound clarity and depth. Users can expect crisp highs and robust lows, making every listening experience engaging and immersive.

Ease of use is another hallmark of the MDS-JE630. The front panel includes an intuitive layout, featuring a large LCD display that clearly shows current track information, time elapsed, and other playback indicators. Additionally, the unit offers various playback modes such as normal, repeat, and shuffle, allowing users to customize their listening experience.

The recording process on the MDS-JE630 is seamless, thanks to its one-touch recording feature. Users can easily initiate recordings from connected sources, including CD players or turntables, via the device's multiple inputs, such as line-in and optical digital inputs. This adaptability makes it a versatile component for any audio setup, whether for home studios or live performances.

Moreover, the MDS-JE630 incorporates a variety of editing functions, including track arranging, dividing, and merging, providing users with the ability to create perfectly curated audio collections. The device also supports a wide range of MiniDisc formats, ensuring compatibility with existing media.

In conclusion, the Sony MDS-JE630 stands out as a premier MiniDisc recorder, offering a blend of advanced technology, user-friendly design, and high-quality playback. Its innovative features and commitment to sound quality have made it a popular choice for music professionals and enthusiasts, solidifying its reputation as a reliable audio recording solution for years to come.
Top Page Image Contents