Panasonic EB-GD75 Setting Vibration Alert, Setting Discreet Mode, Enabling/Disabling the PIN

Basic Operation

Enabling/Disabling the PIN

1From Idle Z Q, select Phone Menu > Security > PIN Z Q

2Use a select Enable / Disable or Change PIN Z Q

3Enter PIN (Between 4 and 8 digits)Z Q

Setting Vibration Alert

When required, the phone can be set up to vibrate when a call is received. Vibration alert enables the user to choose between Continuous, Intermittent vibration alerts when a call is received. Switching on vibration alert will silence the ring volume. If, however, the ring volume is adjusted after the vibration alert is switched on, or the Discreet Mode is switched on, (see “Setting Discreet Mode” page 11 ) and its profile enables ring tones, the phone will ring and vibrate when a call is received.

From Idle Z Q, select Personalise > Vibration Alert.

Choose the vibration setting required, Continuous, Intermittent

or Disable, Z Q

When activated, the phone will vibrate briefly.

Note: When Discreet Mode is enabled, it’s profiles will supercede those of the Vibration alert.

Setting Discreet Mode

Discreet Mode will allow the user to choose between “Vibrate only”, “ring tone only” or both.

1From Idle Z Q select Personalise > Discreet Mode

Z Q

2Use e to select Ring Volume or Vibration Z Q

3Use e to select the required vibration type or ring tone volume

4Z Q to select the required vibration type or ring tone volume

5Z+ Hold #

Note: If the ring tone volume is increased beyond “Max” volume it will set an escalating ring tone.

11