Official Manual for the Sharp HT-SB602 Home Theater System

Remote control (continued)

Test of the remote control

Point the remote control directly at the remote sensor on the sound bar.

The remote control can be used within the range shown below:

Remote sensor

0.2 m - 6 m

15° 15°

General control

Make sure to enable the HDMI CEC when making HDMI connection. For details, refer to the operation manual of the TV.

To turn the power on

Press the ON/STANDBY button on the sound bar or the remote control.

The power turns on and the subwoofer indicator turns blue. If the power does not turn on, check whether the AC power lead is plugged in properly.

The system will automatically power on if TV or similar component which supports HDMI CEC, is turned on.

To set the sound bar to standby mode:

Press the ON/STANDBY button again on the sound bar or the remote control and the subwoofer indicator turns red.

Notes:

A slight audio delay after TV is turned ON does not mean that the system is faulty. This is normal.

“AQUOS speaker is enabled” message will be displayed if SHARP LCD TV does not detect HT-SB602 during power on. However the message “AQUOS audio with AQUOS LINK is enabled” will be displayed soon as HT-SB602 is detected. These messages may vary for other TV model.

Standby mode

The ﬁ rst time the unit is plugged in, it will enter the STANDBY mode.

To cancel the STANDBY mode, press and hold the ECO MODE button (remote control) during power standby mode. The unit will enter the low power consumption mode.

To return to the STANDBY mode, press the ECO MODE button again.

During STANDBY condition, NFC function is activated once your device touches the supplied NFC tag when there is no HDMI connection.

Connecting the wireless Subwoofer

The sound bar and subwoofer will link automatically (wirelessly) when turned on as it is already pre-linked at the factory. If the link cannot be established, please set the connection by the following method.

1.Press and hold the PAIRING button on the sound bar or SW LINK on the remote control for more than 3 seconds.

2.Within 2 minutes, press and hold the SW LINK button on the subwoofer for more than 3 seconds.

During pairing process:

On sound bar: “SW LINK” will blink.

On subwoofer: indicator will blink in blue.

When pairing is successful:

On sound bar: “SW LINK” disappears.

On subwoofer: indicator turns blue.

SW LINK

Sound Bar	Remote	Subwoofer
	Control

Notes:

If a device such as microwave oven, wireless LAN card, Bluetooth device or any other device that uses the same 2.4GHz frequency near the system, some sound interruption may be heard due to interference.

The transmission distance of the wireless signal between the subwoofer and sound bar is about 10m (32 feet), but may vary depending on your operating environment. If a steel-concrete or metallic wall is between the subwoofer and the sound bar, the system may not operate at all, because the wireless signal cannot penetrate metal.

Caution:

Keep the subwoofer away from water and moisture.

To get the optimum listening performance, make sure the area around the sound bar and subwoofer is clear of any obstacles.

E-11

HT-SB602 specifications

The Sharp HT-SB602 is a sleek and modern soundbar designed to elevate your home audio experience. With a focus on delivering rich sound reproduction and a streamlined design, this soundbar has quickly become a favorite among audio enthusiasts and casual listeners alike.

One of the standout features of the HT-SB602 is its 2.1 channel configuration, which includes a built-in subwoofer. This setup ensures that users can enjoy deep bass and clear treble, creating a well-rounded audio experience that enhances music, movies, and gaming. The integrated subwoofer enhances low-frequency sounds, providing a fuller and more immersive soundstage without requiring additional space for external components.

The HT-SB602 supports various audio formats, including Dolby Digital and DTS, which allows for an enhanced surround sound experience. This feature is particularly useful for movie buffs who want to replicate the cinematic experience at home. With advanced sound processing technologies, the soundbar intelligently adjusts audio output for optimized performance based on the content being played.

Connectivity is another highlight of the Sharp HT-SB602. Equipped with multiple input options, including HDMI ARC, optical, and auxiliary ports, users can easily connect the soundbar to TVs, gaming consoles, and other audio devices. Furthermore, the soundbar includes Bluetooth functionality, enabling users to stream music from their smartphones or tablets effortlessly.

In terms of design, the HT-SB602 sports a slim profile that can fit seamlessly under most TV setups or be mounted on the wall. Its modern aesthetic blends well with various interior styles, making it a stylish addition to any living space. The intuitive remote control allows for easy navigation through settings and audio modes, ensuring a user-friendly experience.

Overall, the Sharp HT-SB602 stands out for its combination of advanced audio technologies, versatile connectivity options, and sleek design. Whether you are watching movies, enjoying your favorite music, or playing video games, this soundbar offers an excellent balance of performance and usability, making it a worthy investment for anyone seeking an upgrade to their home entertainment system.