Sony SWR10 manual Setting up your SmartBand, Preparing to use your SmartBand

Page 6

Setting up your SmartBand

Preparing to use your SmartBand

For your SmartBand to work, it must be connected to your Android™ device and the latest versions of the following applications must be installed on the Android™ device: Smart Connect, SmartBand and Lifelog.

If you set up your SmartBand using NFC, you are guided during setup to Google Play™, from where you can install the necessary applications to use with your SmartBand.

If you set up your SmartBand using Bluetooth®, you have to go through some extra steps to install the necessary applications from Google Play™ and connect to your Android™ device.

The Smart Connect application is pre-installed on all Android™ devices from Sony Mobile at purchase. Make sure that you update it to the latest version.

After the SmartBand application is installed, it is not located on the Application screen. You can access it under Devices in the Smart Connect application after your SmartBand is connected to the Android™ device.

To set up your SmartBand using NFC

1Make sure that your SmartBand is charged for at least 30 minutes.

2Android™ device: Make sure you have installed or updated the Smart Connect

application to the latest version from Google Play™.

3Android™ device: Make sure that the NFC function is turned on and that the

screen is active and unlocked.

4Place the Android™ device over your SmartBand so that the NFC area of each device touches the other, then follow the instructions on the Android™ device to install the SmartBand application and the Lifelog application. appears briefly in the status bar and permanently in the Notification panel when a connection with the SmartBand is active.

If you touch the NFC areas of each device to each other after all applications are installed and your SmartBand is on and connected, the Lifelog application starts automatically.

You can drag down the status bar to open the Notification panel and get quick access to the SmartBand application and the Lifelog application.

6

This is an Internet version of this publication. © Print only for private use.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents SmartBand Contents Hardware overview BasicsIntroduction Charging your SmartBandLow battery level notification AssemblyBattery notification light status Turning your SmartBand on and offTo turn off your SmartBand Setting up your SmartBand To set up your SmartBand using NFCPreparing to use your SmartBand Reconnecting your SmartBand Day mode and night modeResetting your SmartBand To reset your SmartBandAuto night mode Settings for your SmartBandUsing the SmartBand application To turn on the auto night mode functionNotifications SmartBand alarmAlarm notifications from an Xperia device Smart wake upOut-of-range alert notifications Incoming call notificationsTo turn on the incoming call notification function To select an application to control using your SmartBandControlling applications from your SmartBand To mute the ringtone for an incoming callTo set up an account for the Lifelog application Logging your activities using the Lifelog applicationUsing the Lifelog application To log in to the Lifelog applicationTo adjust the stride length for running Adjusting the stride length for walking and runningTo adjust the stride length for walking Activity box overviewCreating life bookmarks Setting goalsLogging your sleep with your SmartBand Activity overviewTo create a life bookmark using your SmartBand Using your SmartBand in wet and dusty conditions Important informationIngress Protection Rating Legal information Sony SWR10Industry Canada Statement Declaration of ConformityFCC Statement Avis d’industrie Canada
Top Page Image Contents