To charge your SmartBand
1Plug one end of the USB cable into the charger or into the USB port of a
computer.
2Plug the other end of the cable into the Micro USB port of your SmartBand.
Battery notification light status
Notification light A flashes continuously | The battery is charging and is not yet fully charged |
|
|
Notification light A is on | The battery is fully charged |
To check the battery level of your SmartBand
1From the Home screen of your Android™ device, tap 
, then find and tap
Smart Connect.
2Tap Devices > SmartBand.
Low battery level notification
When your SmartBand is on and the battery level is less than 5%, your SmartBand emits two short vibrations and a popup window in the SmartBand application notifies you that your SmartBand is running out of battery.
Assembly
To assemble your SmartBand
1Select the wristband that best suits you.
2Insert the core into the wristband in such a way that the power key is inserted underneath the power key cover.
Turning your SmartBand on and off
To turn on your SmartBand
•Press and hold down the power key until your SmartBand vibrates.
When turning on your SmartBand for the first time, it automatically enters pairing mode and notification light A flashes until your SmartBand is connected to a device.
4
This is an Internet version of this publication. © Print only for private use.