Sharp HT-DV40H Driving screws, To install the speaker stand, To mount the speakers on the wall

Page 27

Make sure to leave the AC power lead disconnected when connecting the speakers.

To prevent accidental short circuits between + and - terminals, connect the speaker wires to the speakers first, then to the unit.

HT-DV40H HT-DV50H

ENGLISH

CP-DV40H

To install the speaker stand

1Align the hole on the speaker stand to the hole on speaker. Fix them securely with the special screw provided.

Speaker

Speaker stand

Special screw

2Route the speaker wire through the speaker stand hole. Connect the wire without insulation tube to the speaker minus (-) terminal, and the wire with red insulation tube to the speaker plus (+) terminal.

Stand hole

3Connect the other end to the main unit.

4Attach the stand cover.

Stand cover

To mount the speakers on the wall

Caution:

Be very careful to prevent the speaker [2.1kg (4.6 lbs.)] from falling when mounting on the wall.

Before mounting, check the wall strength. (Do not put on the veneer plaster or whitewashed wall. The speakers may fall.) If unsure, consult a qualified service technician.

Mounting screws are not supplied. Use appropriate ones.

Check all mounting screws for looseness and that they are engaged in the speakers.

Mount the speakers on the wall using 2 screws each for horizontal position and using 1 screw each for vertical position.

Select a good location. If not, accidents may occur or the speaker may get damaged.

Avoid placing on a bed, sofa, water tank, sink and hallway wall.

To avoid accidents, fix the speaker wires to the wall. You may trip over them.

SHARP is not responsible for accidents resulting from improper installation.

Driving screws

SHARP designed the speakers so you may hang them on the wall. Use proper screws (not supplied). See below for size and type.

3.2 mm (1/8")

5 mm (3/16")

9 mm (3/8")

Min. 22 mm (7/8")

Preparation for Use

Special screw

E-14

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Modell Modello Modèle Modelo HT-DV40H HT-DV50HHT-DV40H HT-DV50H Avvertenza WaarschuwingAdvertência Attenzione VorsichtAdvertencia VarningHT-DV40H HT-DV50H Protection contre la copie Renseignements sur les droits d’auteurKopieringsskydd UpphovsrättsinformationProtezione contro la Copia Informazioni sui diritti dautoreCopy Protection Informação de direitos de autorProtecção contra cópia Copyright InformationHT-DV40H HT-DV50H HT-DV40H HT-DV50H HT-DV40H HT-DV50H Xii CP-DV50U Special Note AccessoriesIntroduction CP-DV40HContents Cooling fan PrecautionsVolume control GeneralDoor Open Controls and indicatorsFront panel Rear panelDisplay 13 14 20 21 22CP-DV50H Speaker system CP-DV40HSpeaker system CP-DV50H Subwoofer CP-SW40HRemote control 31, 32 Remote control with shift buttonCursor Right Button , 34, 38, 40, 41, 46, 47 RDS Disp ButtonDisc type Disc contents Description of discsTypes of playable discs Icons used on DVD discs Discs that cannot be playedTitle, chapter and track DivXIf colour variation occurs System installationInstallation image Magnetically shielded speakersLeft speaker System connectionsSystem connections To install the speaker stand Driving screwsTo mount the speakers on the wall Vertical position Installing the speakersMake a hole in the wall using a drill WallCP-DV50H Aerial connection AC power connectionDemonstration mode SubwooferConnecting to a conventional TV/monitor Digital tuner, etc Audio connection to other equipmentConnection for the analogue sound VCR, etc VCR, DVD recorder, etcClose the cover Precautions for battery use Remote controlBattery installation Test of the remote controlHT-DV40HChanging the set up menu System TV System Ntsc Changing the set up menu Set up menu Saturation DVD disc type Unit setting TV display settingTV system setting Language settingPassword setting Rating settingGeneral control To change the 24-hour or 12-hour display Setting the clock Remote Control onlyTo readjust the clock To confirm the time displayPreset sound modes and sound image Enjoying surround sound sound modePress the DVS button Preset sound mode Dolby Virtual Speaker DVS sound modeBass control Treble controlAudistry sound mode Press the Shift and desired mode button simultaneouslyOFF Mono to Stereo Intelligent VolumeSound Space Natural BassPlaying a disc Playback WMAPress the DVD/CD button Various disc functions Auto power on functionDVD mode operation indicators To resume playback after stopping resume playDVD Basic operation Fast forward/Fast reverse searchTo locate the beginning of a chapter track skip Press Direct button To start playback from the desired point direct playPress the Enter button after confirm To play by specifying time time searchStill Useful operationSlow motion play DVD/CDTo change the angle To zoom images zoomTo select a subtitle or audio language from the disc menu Enter Title Enter Chapter To cancel the programmed play modeTo play in the desired order programmed play Whilst in the stop mode, press the MEMORY/DIMMER buttonWhilst a disc is playing, press the button to Repeat To play repeatedly repeat playTo change the display on TV screen To change the display on main unitDesired subtitle language To change the subtitle languageTo change the audio language audio output MP3/WMAWMA Listening to a CD or MP3/WMA discTo cancel random play Advanced CD or MP3/WMA disc playbackTo play in random order random play Playback on the DivX and Jpeg menu screen DivX and Jpeg disc operationZoom function Rotating a picture RW OperationTo remove USB memory device Playback on USB memory deviceTo remove USB memory device Playback on USB memory deviceAdvanced USB playback Repeat play Remote Control onlyRandom play Remote Control only Case of an USB modeTuning Auto tuningListening to the radio To recall a memorised station To scan the preset stationsTo erase entire preset memory Memorising a stationInformation provided by RDS Using the Radio Data System RDSUsing the Auto Station Programme Memory Aspm To erase all of the contents of preset memoryTo stop the Aspm operation before it is complete To recall stations in memory Sport NewsAffairs InfoOther M AlarmLight M ClassicsTimer playback Timer and sleep operation Remote Control onlyDo not turn the volume up too high Cancelling the timer setting in the timer stand-by mode When the preset time is reached, playback will startDaily timer Checking the timer setting in the timer stand-by modeSleep operation To use timer and sleep operation togetherTroubleshooting chart Symptom Possible causeHeadphone connection USB DVD playerBefore transporting the unit Factory reset, clearing all memoryTuner CondensationCare of compact discs MaintenanceError indicators and warning Cleaning the cabinetMain Unit SpecificationsCP-DV50H Speaker CP-DV40H SpeakerSharp Electronics Europe GmbH HT-DV40H/HT-DV50H
Related manuals
Manual 68 pages 47.71 Kb

HT-DV40H specifications

The Sharp HT-DV40H is an all-in-one home theater system designed to deliver a comprehensive audio-visual experience. This compact yet powerful system integrates multiple technologies and features to enhance your entertainment setup, making it a popular choice among consumers looking for quality performance without the hassle of numerous separate components.

One of the key characteristics of the HT-DV40H is its impressive 5.1-channel surround sound capability. This means it comes with five satellite speakers and a subwoofer, providing immersive audio that makes you feel like you're part of the action, whether you're watching movies or listening to music. The subwoofer produces deep bass tones that add richness to soundtracks and sound effects.

The HT-DV40H supports various audio formats, including Dolby Digital and DTS, ensuring compatibility with most modern multimedia content. This versatility allows it to decode high-quality audio streams effectively, delivering crystal-clear sound for dialogues, music, and all other audio elements. Additionally, the system features built-in equalization options, enabling users to adjust sound profiles according to their preferences.

In terms of video playback, the Sharp HT-DV40H offers multiple connectivity options, including HDMI, composite, and component outputs. This allows users to easily connect the system to their television and other devices. The inclusion of an HDMI output simplifies one-cable connection to your display, supporting high-definition video and high-quality audio in a single interface.

Furthermore, the HT-DV40H is equipped with a built-in DVD player, providing convenience with those who prefer physical media. The upscaling feature enhances video resolution, taking standard DVDs and boosting their quality closer to HD, making your viewing experience visually appealing.

Another significant aspect of the HT-DV40H is its user-friendly interface and remote control, allowing easy navigation through menus, audio settings, and playback options. The compact design ensures that this system doesn’t take up excessive space, fitting seamlessly into any room setup.

Overall, the Sharp HT-DV40H is an excellent home theater system that combines advanced audio and video technologies, catering to users seeking an all-in-one solution for their entertainment needs. Its high-quality surround sound, versatile connectivity, and integrated DVD capabilities make it a worthwhile investment for movie lovers and music enthusiasts alike.
Top Page Image Contents