Sharp HT-DV40H Memorising a station, To recall a memorised station, To scan the preset stations

Page 64

HT-DV40H HT-DV50H

ENGLISH

Listening to the radio (continued)

Operation

Notes:

When radio interference occurs, auto scan tuning may stop automatically at that point.

Auto scan tuning will skip weak signal stations.

To stop the auto tuning, press the TUNING ( or ) button again. When an RDS (Radio Data System) station is tuned in, the frequency will be displayed first, and then the RDS indicator will light up. Finally, the station name will appear.

Full auto tuning can be achieved for RDS stations “ASPM”, see page 53.

To receive an FM stereo transmission:

Press the TUNER button to select stereo mode and “ST” indicator will be displayed.

“” will appear when an FM broadcast is in stereo.

If the FM reception is weak, press the TUNER button to extinguish the “ST” indicator. The reception changes to monaural, and the sound becomes clearer.

FM stereo receiving indicator

4Within 30 seconds, press the MEMORY/DIMMER button to store that station in memory.

If the “MEMORY” and preset number indicators disappear before the station is memorised, repeat the operation from step 2.

5Repeat steps 1 - 4 to set other stations, or to change a preset station.

When a new station is stored in memory, the station previously memorised for that preset channel number will be erased.

Note:

The backup function protects the memorised stations for a few hours should there be a power failure or the AC power lead become disconnected.

Radio

E-51

FM stereo mode indicator

Memorising a station

Up to 30 stations for FM band can be stored and recalled at the push of a button. (PRESET ( or ) )

1Perform steps 1 - 3 in “Tuning” on page 50.

2Press the MEMORY/DIMMER button to enter the preset tuning saving mode.

3Within 30 seconds, press the PRESET ( or ) button to select the preset channel number.

Store the stations in memory, in order, starting with preset channel 1.

To recall a memorised station

Press the PRESET ( or ) button for less than 0.5 seconds to select the desired station.

To scan the preset stations

The station saved in memory can be scanned automatically. (Preset memory scan)

1 Press the PRESET ( or ) button for more than 0.5 seconds. The preset number will flash and the programmed stations will be tuned in sequentially, for 5 seconds each.

2Press the PRESET ( or ) button again when the desired station is located.

To erase entire preset memory

1Press the ON/STAND-BY button to enter the stand-by mode.

2Press and hold CLEAR/DISPLAY button until "TUNER CLEAR" appears.

Page 63 Page 65
Image 64
Page 63 Page 65
Contents HT-DV40H HT-DV50H Modell Modello Modèle ModeloHT-DV40H HT-DV50H Waarschuwing AvvertenzaAdvertência Vorsicht AdvertenciaVarning AttenzioneHT-DV40H HT-DV50H Renseignements sur les droits d’auteur Protection contre la copieUpphovsrättsinformation KopieringsskyddInformazioni sui diritti dautore Protezione contro la CopiaInformação de direitos de autor Protecção contra cópiaCopyright Information Copy ProtectionHT-DV40H HT-DV50H HT-DV40H HT-DV50H HT-DV40H HT-DV50H Xii Special Note Accessories IntroductionCP-DV40H CP-DV50UContents Precautions Volume controlGeneral Cooling fanControls and indicators Front panelRear panel Door Open13 14 20 21 22 DisplaySpeaker system CP-DV40H Speaker system CP-DV50HSubwoofer CP-SW40H CP-DV50HRemote control Remote control with shift button Cursor Right Button , 34, 38, 40, 41, 46, 47RDS Disp Button 31, 32Description of discs Disc type Disc contentsTypes of playable discs Discs that cannot be played Title, chapter and trackDivX Icons used on DVD discsSystem installation Installation imageMagnetically shielded speakers If colour variation occursSystem connections Left speakerSystem connections Driving screws To install the speaker standTo mount the speakers on the wall Installing the speakers Make a hole in the wall using a drillWall Vertical positionCP-DV50H AC power connection Demonstration modeSubwoofer Aerial connectionConnecting to a conventional TV/monitor Audio connection to other equipment Connection for the analogue sound VCR, etcVCR, DVD recorder, etc Digital tuner, etcRemote control Battery installationTest of the remote control Close the cover Precautions for battery useHT-DV40HChanging the set up menu System TV System Ntsc Changing the set up menu Set up menu Saturation TV display setting TV system settingLanguage setting DVD disc type Unit settingRating setting Password settingGeneral control Setting the clock Remote Control only To readjust the clockTo confirm the time display To change the 24-hour or 12-hour displayEnjoying surround sound sound mode Preset sound modes and sound imagePreset sound mode Dolby Virtual Speaker DVS sound mode Bass controlTreble control Press the DVS buttonPress the Shift and desired mode button simultaneously Audistry sound modeOFF Intelligent Volume Sound SpaceNatural Bass Mono to StereoPlayback WMA Playing a discPress the DVD/CD button Auto power on function Various disc functionsTo resume playback after stopping resume play DVD mode operation indicatorsDVD Fast forward/Fast reverse search Basic operationTo locate the beginning of a chapter track skip To start playback from the desired point direct play Press the Enter button after confirmTo play by specifying time time search Press Direct buttonUseful operation Slow motion playDVD/CD StillTo zoom images zoom To change the angleTo select a subtitle or audio language from the disc menu To cancel the programmed play mode To play in the desired order programmed playWhilst in the stop mode, press the MEMORY/DIMMER button Enter Title Enter ChapterTo play repeatedly repeat play To change the display on TV screenTo change the display on main unit Whilst a disc is playing, press the button to RepeatTo change the subtitle language To change the audio language audio outputMP3/WMA Desired subtitle languageListening to a CD or MP3/WMA disc WMAAdvanced CD or MP3/WMA disc playback To cancel random playTo play in random order random play DivX and Jpeg disc operation Playback on the DivX and Jpeg menu screenRW Operation Zoom function Rotating a picturePlayback on USB memory device To remove USB memory devicePlayback on USB memory device To remove USB memory deviceRepeat play Remote Control only Random play Remote Control onlyCase of an USB mode Advanced USB playbackAuto tuning TuningListening to the radio To scan the preset stations To erase entire preset memoryMemorising a station To recall a memorised stationUsing the Radio Data System RDS Information provided by RDSTo erase all of the contents of preset memory Using the Auto Station Programme Memory AspmTo stop the Aspm operation before it is complete To recall stations in memory News AffairsInfo SportAlarm Light MClassics Other MTimer and sleep operation Remote Control only Timer playbackDo not turn the volume up too high When the preset time is reached, playback will start Daily timerChecking the timer setting in the timer stand-by mode Cancelling the timer setting in the timer stand-by modeTo use timer and sleep operation together Sleep operationSymptom Possible cause Troubleshooting chartHeadphone connection DVD player USBFactory reset, clearing all memory TunerCondensation Before transporting the unitMaintenance Error indicators and warningCleaning the cabinet Care of compact discsSpecifications Main UnitCP-DV40H Speaker CP-DV50H SpeakerSharp Electronics Europe GmbH HT-DV40H/HT-DV50H
Related manuals
Manual 68 pages 47.71 Kb

HT-DV40H specifications

The Sharp HT-DV40H is an all-in-one home theater system designed to deliver a comprehensive audio-visual experience. This compact yet powerful system integrates multiple technologies and features to enhance your entertainment setup, making it a popular choice among consumers looking for quality performance without the hassle of numerous separate components.

One of the key characteristics of the HT-DV40H is its impressive 5.1-channel surround sound capability. This means it comes with five satellite speakers and a subwoofer, providing immersive audio that makes you feel like you're part of the action, whether you're watching movies or listening to music. The subwoofer produces deep bass tones that add richness to soundtracks and sound effects.

The HT-DV40H supports various audio formats, including Dolby Digital and DTS, ensuring compatibility with most modern multimedia content. This versatility allows it to decode high-quality audio streams effectively, delivering crystal-clear sound for dialogues, music, and all other audio elements. Additionally, the system features built-in equalization options, enabling users to adjust sound profiles according to their preferences.

In terms of video playback, the Sharp HT-DV40H offers multiple connectivity options, including HDMI, composite, and component outputs. This allows users to easily connect the system to their television and other devices. The inclusion of an HDMI output simplifies one-cable connection to your display, supporting high-definition video and high-quality audio in a single interface.

Furthermore, the HT-DV40H is equipped with a built-in DVD player, providing convenience with those who prefer physical media. The upscaling feature enhances video resolution, taking standard DVDs and boosting their quality closer to HD, making your viewing experience visually appealing.

Another significant aspect of the HT-DV40H is its user-friendly interface and remote control, allowing easy navigation through menus, audio settings, and playback options. The compact design ensures that this system doesn’t take up excessive space, fitting seamlessly into any room setup.

Overall, the Sharp HT-DV40H is an excellent home theater system that combines advanced audio and video technologies, catering to users seeking an all-in-one solution for their entertainment needs. Its high-quality surround sound, versatile connectivity, and integrated DVD capabilities make it a worthwhile investment for movie lovers and music enthusiasts alike.
Top Page Image Contents