Sharp HT-DV40H Subwoofer, Aerial connection, External FM aerial, AC power connection

Page 30

HT-DV40H HT-DV50H

System connections (continued)

ENGLISH

Preparation for Use

Subwoofer

1Connect the wire without insulation tube to the SUBWOOFER minus (-) terminal, and the wire with purple insulation tube to the SUBWOOFER plus (+) terminal.

Purple

Caution:

Never mistake the FRONT SPEAKERS and the SUBWOOFER terminals. The unit or the speakers may be damaged.

If you use other speakers with an impedance lower than that specified, the unit may be damaged. Front speakers: 4 ohms, Subwoofer: 12 ohms.

Do not mistake the right and the left

 

channels. The right speaker is the one on the

 

right side when you face the unit.

 

Do not let the bare speaker wires touch

 

each other.

 

Do not allow any objects to fall into or to be

 

placed in the bass reflex duct.

 

Do not stand or sit on the subwoofer/

 

speakers. You may be injured.

Incorrect

Aerial connection

Supplied FM aerial:

 

Connect the FM aerial wire to the FM 75 OHMS

FM

socket and position the FM aerial wire in the

aerial

direction where the strongest signal can be

 

received.

 

Note:

 

Placing the aerial on the unit or near the AC

 

power lead may cause noise pickup.

 

Place the aerial away from the unit for better

 

reception.

 

External FM aerial

Use an external FM aerial if you require better reception. Consult your dealer.

75 ohms

External

coaxial cable

FM aerial

 

 

Note:

When an external FM aerial is used, disconnect the supplied FM aerial wire.

AC power connection

After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. If you plug in the unit first, the unit will enter the stand-by mode.

Wall socket

(AC 220 - 240 V ~ 50 Hz)

Note:

Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time.

Demonstration mode

The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll.

To cancel the demonstration mode:

When the unit is in the power stand-by mode (demonstration mode), press the SHIFT and DEMO buttons on the remote control. The unit will enter the low power consumption mode.

To return to the demonstration mode:

When the unit is in the power stand-by mode, press the SHIFT and DEMO buttons on the remote control again.

E-17

Page 29 Page 31
Image 30
Page 29 Page 31
Contents HT-DV40H HT-DV50H Modell Modello Modèle ModeloHT-DV40H HT-DV50H Avvertenza WaarschuwingAdvertência Varning VorsichtAdvertencia AttenzioneHT-DV40H HT-DV50H Renseignements sur les droits d’auteur Protection contre la copieUpphovsrättsinformation KopieringsskyddInformazioni sui diritti dautore Protezione contro la CopiaCopyright Information Informação de direitos de autorProtecção contra cópia Copy ProtectionHT-DV40H HT-DV50H HT-DV40H HT-DV50H HT-DV40H HT-DV50H Xii CP-DV40H Special Note AccessoriesIntroduction CP-DV50UContents General PrecautionsVolume control Cooling fanRear panel Controls and indicatorsFront panel Door Open13 14 20 21 22 DisplaySubwoofer CP-SW40H Speaker system CP-DV40HSpeaker system CP-DV50H CP-DV50HRemote control RDS Disp Button Remote control with shift buttonCursor Right Button , 34, 38, 40, 41, 46, 47 31, 32Disc type Disc contents Description of discsTypes of playable discs DivX Discs that cannot be playedTitle, chapter and track Icons used on DVD discsMagnetically shielded speakers System installationInstallation image If colour variation occursSystem connections Left speakerSystem connections To install the speaker stand Driving screwsTo mount the speakers on the wall Wall Installing the speakersMake a hole in the wall using a drill Vertical positionCP-DV50H Subwoofer AC power connectionDemonstration mode Aerial connectionConnecting to a conventional TV/monitor VCR, DVD recorder, etc Audio connection to other equipmentConnection for the analogue sound VCR, etc Digital tuner, etcTest of the remote control Remote controlBattery installation Close the cover Precautions for battery useHT-DV40HChanging the set up menu System TV System Ntsc Changing the set up menu Set up menu Saturation Language setting TV display settingTV system setting DVD disc type Unit settingRating setting Password settingGeneral control To confirm the time display Setting the clock Remote Control onlyTo readjust the clock To change the 24-hour or 12-hour displayEnjoying surround sound sound mode Preset sound modes and sound imageTreble control Preset sound mode Dolby Virtual Speaker DVS sound modeBass control Press the DVS buttonAudistry sound mode Press the Shift and desired mode button simultaneouslyOFF Natural Bass Intelligent VolumeSound Space Mono to StereoPlaying a disc Playback WMAPress the DVD/CD button Auto power on function Various disc functionsDVD mode operation indicators To resume playback after stopping resume playDVD Basic operation Fast forward/Fast reverse searchTo locate the beginning of a chapter track skip To play by specifying time time search To start playback from the desired point direct playPress the Enter button after confirm Press Direct buttonDVD/CD Useful operationSlow motion play StillTo change the angle To zoom images zoomTo select a subtitle or audio language from the disc menu Whilst in the stop mode, press the MEMORY/DIMMER button To cancel the programmed play modeTo play in the desired order programmed play Enter Title Enter ChapterTo change the display on main unit To play repeatedly repeat playTo change the display on TV screen Whilst a disc is playing, press the button to RepeatMP3/WMA To change the subtitle languageTo change the audio language audio output Desired subtitle languageListening to a CD or MP3/WMA disc WMATo cancel random play Advanced CD or MP3/WMA disc playbackTo play in random order random play DivX and Jpeg disc operation Playback on the DivX and Jpeg menu screenRW Operation Zoom function Rotating a picturePlayback on USB memory device Playback on USB memory deviceTo remove USB memory device To remove USB memory deviceCase of an USB mode Repeat play Remote Control onlyRandom play Remote Control only Advanced USB playbackTuning Auto tuningListening to the radio Memorising a station To scan the preset stationsTo erase entire preset memory To recall a memorised stationUsing the Radio Data System RDS Information provided by RDSUsing the Auto Station Programme Memory Aspm To erase all of the contents of preset memoryTo stop the Aspm operation before it is complete To recall stations in memory Info NewsAffairs SportClassics AlarmLight M Other MTimer and sleep operation Remote Control only Timer playbackDo not turn the volume up too high Checking the timer setting in the timer stand-by mode When the preset time is reached, playback will startDaily timer Cancelling the timer setting in the timer stand-by modeTo use timer and sleep operation together Sleep operationTroubleshooting chart Symptom Possible causeHeadphone connection DVD player USBCondensation Factory reset, clearing all memoryTuner Before transporting the unitCleaning the cabinet MaintenanceError indicators and warning Care of compact discsSpecifications Main UnitCP-DV40H Speaker CP-DV50H SpeakerSharp Electronics Europe GmbH HT-DV40H/HT-DV50H
Related manuals
Manual 68 pages 47.71 Kb

HT-DV40H specifications

The Sharp HT-DV40H is an all-in-one home theater system designed to deliver a comprehensive audio-visual experience. This compact yet powerful system integrates multiple technologies and features to enhance your entertainment setup, making it a popular choice among consumers looking for quality performance without the hassle of numerous separate components.

One of the key characteristics of the HT-DV40H is its impressive 5.1-channel surround sound capability. This means it comes with five satellite speakers and a subwoofer, providing immersive audio that makes you feel like you're part of the action, whether you're watching movies or listening to music. The subwoofer produces deep bass tones that add richness to soundtracks and sound effects.

The HT-DV40H supports various audio formats, including Dolby Digital and DTS, ensuring compatibility with most modern multimedia content. This versatility allows it to decode high-quality audio streams effectively, delivering crystal-clear sound for dialogues, music, and all other audio elements. Additionally, the system features built-in equalization options, enabling users to adjust sound profiles according to their preferences.

In terms of video playback, the Sharp HT-DV40H offers multiple connectivity options, including HDMI, composite, and component outputs. This allows users to easily connect the system to their television and other devices. The inclusion of an HDMI output simplifies one-cable connection to your display, supporting high-definition video and high-quality audio in a single interface.

Furthermore, the HT-DV40H is equipped with a built-in DVD player, providing convenience with those who prefer physical media. The upscaling feature enhances video resolution, taking standard DVDs and boosting their quality closer to HD, making your viewing experience visually appealing.

Another significant aspect of the HT-DV40H is its user-friendly interface and remote control, allowing easy navigation through menus, audio settings, and playback options. The compact design ensures that this system doesn’t take up excessive space, fitting seamlessly into any room setup.

Overall, the Sharp HT-DV40H is an excellent home theater system that combines advanced audio and video technologies, catering to users seeking an all-in-one solution for their entertainment needs. Its high-quality surround sound, versatile connectivity, and integrated DVD capabilities make it a worthwhile investment for movie lovers and music enthusiasts alike.
Top Page Image Contents