Using the FM radio
The FM radio in your phone works like any FM radio. For example, you can browse and listen to FM radio stations and save them as favourites. You must connect a wired headset or headphones to the phone before you can use the radio. This is because the headset or headphones act as an antenna. After one of these devices is connected, you can then switch the radio sound to the phone speaker, if desired.
When you open the FM radio, available channels appear automatically. If a channel has RDS information, it appears a few seconds after you start listening to the channel.
To start the FM radio
1Connect a headset or a set of headphones to your phone.
2From your Home screen, tap 
.
3Find and tap FM radio 
. The available channels appear as you scroll through the frequency band.
When you start the FM radio, available channels appear automatically. If a channel has RDS information, it appears a few seconds after you start listening to the channel.
FM radio overview
7
1 
2 
3
4
5 
6 | 8 |
1Move upwards to the previous favourite (available when favourites are saved)
2The tuned frequency
3Save or remove a channel as a favourite
4Move downwards to the next favourite (available when favourites are saved)
5An saved favourite channel
6Radio on/off key
7RDS (Radio Data System) information – not available in all countries/regions
8Open the TrackID™ application
Moving between radio channels
You can move between radio channels along a frequency band by:
•Flicking up and down.
•Dragging.
•Tapping a channel or, if available, the RDS information (station identification).
81
This is an Internet version of this publication. © Print only for private use.