
Placing and Ending Calls
First check that your phone is ON.
To place a call:
1.Extend the antenna completely for best performance.
2.Open keypad cover to expose the keypad.
3.Enter the number you want to call, for example:
Press ‚ to erase one digit at a time if you make a mistake.
Hold ‚ to erase the entire entry.
4.Press ¾ to place the call.
You will see: Dialing
Press & hold Smart Button until you hear a high tone. You will see: Dialing
You can dial phone numbers with up to 32 digits, but only the last
Press ä to see the rest of the number.
Your phone will display the first 24 digits, then a second screen will show the remaining digits in the phone number.
To end a call:
Close keypad cover to hang up your phone. or
Press ¼. or
Press & hold Smart Button until you hear a high tone. You will see: Press ¤ to End Call.
then
Press Smart Button again to end the call.
Placing a Call
Ending a Call
The Basics
29