ASSEMBLING AND ADJUSTING
9. Attaching the motor pulley
Attach the motor pulley to the motor.
Using the adjustment screwdriver included to fix the pulley’s 3 plastic screws.
Be careful not to turn the screws with too much force, as they are made from plastic and can break easily.
Included screwdriver for adjustment
11. Installing the belt
Use one of the belts included and attach it between the motor pulley and turntable.
When attaching the belt, hook it over the central slot.
(There are 2 belts included with the turntable. Please keep one as a spare.)
Central slot
When attaching the pulley, fix with approximately 3mm space between the pulley and motor.
3mm
10. Installing the motor
From underneath the turntable chassis, place the motor in the hole section at the back left of the turntable chassis.
(Do not fix it to the turntable base)
Does not touch
Caution:
When installing the motor, in order to prevent motor vibrations from being transmitted to the turntable base, install the motor so that it does not touch the base.
The positions for attaching the motor pulley belt are different when playing 45 or 33 rpm records.
Change the position of the belt to suit the record that you want to play.
Attach to the | Attach to the | ||||
lower side | upper side | ||||
|
|
|
|
|
|
|
|
|
|
|
|
33 rpm | 45 rpm |
Caution:
When changing the position of the belt, use the gloves included, and be careful not to damage the belt in any way.
9