Motorola i390 specs

Nextel Direct ConnectSM

Simple steps for programming your Nextel Direct ConnectSM Private Call calling list

Every Nextel subscriber has a unique identification number up to 5 digits in length specifically for this service. We refer to them here as IDs. If you’d like to create a private calling list — here’s how:

1.Press , , , .

2.Press under “Ok.”

3.Press under “Ok” to add entry.

4.Enter the ID (up to 5 digits) and press under “Store.”

5.Enter the name you want associated with this ID and

press under “Store.” For example, to enter the name Tim:

•For the letter T, press the key once.

•Press the key to move to the next letter.

•For the letter I, press the key three times until the I blinks on the display.

•Press the key to move to the next letter.

•For the letter M, press the key one time.

6.Once the name is entered, press under “Store.”

7.When you have entered all the new IDs that you want,

press under “Exit.”

8.Press “Exit” again to return to the previous screen.

You can also edit or erase a Private Call calling list entry.

Here’s how:

1.Press , , , .

2.Press under “Ok.”

3.To edit, press once. To erase, press twice.

4.Follow the prompts on the phone.

Nextel Direct ConnectSM

Use Nextel Direct ConnectSM Group Call to call your team.

Much simpler than setting up a conference call, a Group Call allows you to instantly communicate with members of a selected group — a pre-defined set of individuals who share a common communication need. Nextel calls this group a “TalkGroup.” Groups appear on your display as names or numbers, for example, SALES TEAM or Talkgrp5. You’ll want to make a Group Call if you want to talk to more than one person at the same time.

Either your Sales Representative or Nextel Customer Care (1-800-639-6111) can help you set up your “TalkGroups.” Once they have given you your “TalkGroup” number, you can name

the list by dialing , , , . Then follow the

Private Call calling list instructions on page 24.

To make a Group Call, press until you see “Group Ready” (if group names and numbers have been pre-programmed, you will see the first programmed group name), then enter or scroll to the Group Call ID of the group you want to reach. Finally, press and hold the PTT button on the side of your phone, wait for the chirp and speak into the mouthpiece. Release the PTT button to listen.

When you join a Group Call, you’ll be able to hear everything that’s being said in your call.

1.To join a Group Call, press until you see “Group Ready.”

2.Press to scroll to the “TalkGroup” number you’d like to access.

3.Press the under “Ok.”

4.Press the PTT button to speak and release it to listen. On a Group Call, anyone can talk, but only one at a time. To end a Group Call, press any key other than the PTT button.