V3-Razr Repair Manual
3.Release the four housing latches by inserting the pointed end of the plastic disassembly tool into the openings on the rear housing.
4.Carefully rotate the rear housing away from the front housing and flip assembly.
5.Use the disassembly tool to unseat the flex connector from it’s socket.
6.Lift the rear housing assembly away from the phone.
7.To replace, carefully align the flex connector to it’s socket on the rear housing assembly, then gently press down on the flex connector until it is properly seated in it’s socket.
8.Rotate the rear housing assembly so it sits over the phone.
9.Align the housing latches with the corresponding openings on the front housing. Gently press the housings together until the catches snap into place.
Page 17
Document
This document is considered an uncontrolled document when printed