Motorola MB200 manual Bluetooth wireless

Bluetooth® wireless

lose the wires

Turn Bluetooth power on or off

Find it: Press and hold Power > Bluetooth

Note: To extend battery life, turn Bluetooth power off when not in use.

Connect to new Bluetooth® devices

Note: This feature requires an optional accessory.

To connect with a new device, you need to pair with it. You only need to do this once for each device—to connect again, just turn on the device.

1Make sure the device you are pairing with is in discoverable mode.

Note: Refer to the guide that came with the device for details.

2Press Menu > Settings > Wireless controls > Bluetooth settings.

3Tap Bluetooth to turn on and scan. If Bluetooth power is already on, tap Scan for devices.

4Tap a device to connect.

5If necessary, tap OK, or enter the device passkey (like 0000) to connect to the device. When the

device is connected, the Bluetooth indicator appears in the status bar.

Note: Using a mobile device or accessory while driving may cause distraction and may be illegal. Always obey the laws and drive safely.

Reconnect devices

To automatically reconnect your phone with a paired device, simply turn on the device.

To manually reconnect your phone with a paired device, tap the device name in the Bluetooth devices list.

Disconnect Bluetooth® devices

To automatically disconnect your phone from a paired device, simply turn off the device.

To manually disconnect your phone from a paired device, tap the device name in the devices list, then press Menu > Disconnect.

Edit properties

Press Menu > Settings > Wireless controls

>Bluetooth settings > Device name. Enter a name and tap OK.

Bluetooth® wireless 47