Sharp HTSB250 operation manual AC power connection, Remote control, Using with the AC/DC adaptor

Page 11
E-10

AC power connection

After checking all the connections have been made correctly, connect the AC power cord to the AC power input jack, then to the AC outlet.

Using with the AC/DC adaptor

1Plug the AC power cord into the AC/DC adaptor.

2Plug the AC/DC adaptor cable into the DC INPUT jack on the unit.

3Plug the AC power cord into an AC outlet.

AC/DC Adaptor

2

Cable

 

Remote control

Battery installation

This product contains a CR Coin Lithium Battery which contains Perchlorate Material – special handling may apply, California residents, see www.dtsc.ca.gov/hazardouswaste/perchlorate/

Insert pin into the hole as shown and pull to open the battery holder.

Pin

Back of

remote control

DC INPUT jack (DC 12V)

AC power cord

 

LINE IN 2

RIGHT

LEFT

 

LINE IN 1

 

 

 

 

1

2Remove the old battery from the battery holder, insert the new battery and then slide the battery holder back into the remote control.

Battery holder Battery type

AC/DC Adaptor (AC 100 - 240 V

Polarity (+) symbol

Locking tab

AC outlet

~ 50/60 Hz)

Positive (+) side up

Caution:

If this product is to be used in other than 120 V region, please change the AC power cord to suit the region.

The AC power cord part codes for 220 - 240 V region are as follow :

1) QACCEA002AW00 (For Europe and Latin America region)

2) QACCBA005AW00 (For United Kingdom region)

3) QACCLA002AW00 (For Australia region)

Notes:

There will be no indication during power stand-by mode unless the ON/STAND-BY button is pressed.

Unplug the AC/DC adaptor from the AC outlet if the unit will not be used for a prolonged period of time.

Use only the supplied AC/DC adaptor. Using other AC/DC adaptor may cause an electric shock or fire.

Precautions for battery use:

Remove the battery if the unit will not be used for a long period of time. This will prevent potential damage due to battery leakage.

Caution:

Do not use rechargeable battery (nickel- cadmium battery, etc.).

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Batteries (battery pack or batteries installed)

Image 11
Contents HT-SB250BK AccessoriesSpecial notes FeaturesIf the product has been exposed to rain or water Additional Safety InformationWhen the AC cord or plug is damaged Use only with the cartImportant Safety Instructions General PrecautionsFor U.S. customer only Case of an electrical storm, unplug the unit for safety Controls and indicatorsPrecautions Volume controlRear Panel Controls and indicatorsRemote Control Wall mount angle fixed to the wall Horizontal position System preparationDriving screws Placing the sound bar Installing the sound barSound bar connections to TVs Connecting to a TVConnecting to a TV with Headphone jack Falling preventionBattery installation AC power connectionRemote control Using with the AC/DC adaptorGeneral control Remote controlTo turn the power on Volume auto fade-inGeneral control Symptom Possible cause Troubleshooting chartIf such a problem occurs, do the following MaintenanceFactory reset, clearing all setting Cleaning the cabinetSpecifications Error indicators and warnings

HTSB250 specifications

The Sharp HT-SB250 is a sophisticated soundbar designed to enhance your audio experience, delivering rich, immersive sound that complements your home entertainment system. Featuring a sleek and compact design, it fits seamlessly into any living space, whether placed on a shelf or mounted on a wall. This soundbar is particularly aimed at enhancing the auditory experience for movies, music, and gaming, making every audio cue crystal clear.

One of the standout features of the HT-SB250 is its virtual surround sound technology, which creates a more spatial audio experience without needing multiple speakers spread throughout the room. This technology utilizes advanced audio algorithms to simulate the effects of a multi-channel surround sound system, allowing users to fully engage with their content, as if they were in a movie theater.

The soundbar is equipped with Bluetooth connectivity, enabling users to stream their favorite music and podcasts directly from their smartphones or other Bluetooth-enabled devices. This wireless feature adds convenience and flexibility, allowing for an easy connection without the hassle of tangled wires. Additionally, the HT-SB250 includes an HDMI ARC input, which simplifies the connection to your television, enabling high-quality audio output while also allowing control of the soundbar with your TV remote.

With built-in EQ presets, users can personalize their audio experience further by selecting different sound profiles tailored for specific content types. Whether you’re watching an action-packed film, listening to music, or playing video games, the soundbar can be adjusted to deliver optimal sound quality according to your preferences.

The HT-SB250 also features a powerful built-in subwoofer, which enhances bass response, making the audio more dynamic and impactful. This feature is particularly noticeable in action scenes or bass-heavy music, where it adds depth and richness to the overall sound profile.

In terms of build quality, the Sharp HT-SB250 is designed to be both durable and aesthetically pleasing, with a stylish finish that complements a variety of interior designs. Its intuitive control panel and remote functionality make it user-friendly, ensuring that anyone can enjoy a premium audio experience right out of the box.

Overall, the Sharp HT-SB250 is a remarkable soundbar that effectively combines modern technology and user-centric design, making it a strong contender for anyone looking to elevate their home audio setup. Its features blend convenience, quality, and performance, making it a great addition to any sound system.