Sony Ericsson manual WAP operator technical data, Feature Support for WAP in the J200, Ota

White Paper J200

Feature	Support in the J200 WAP browser
WAP profiles	5 WAP profiles, each with its own settings
WTLS (security)	Yes,
	WTLS Class 1	- Encryption
	WTLS Class 2	- Encryption + Server Authentication. Root Certificates
	needed in phone

WAP operator technical data

Feature

Support for WAP in the J200

WAP Browser

Version	1,21 baseline
WAP Provisioning
Total Parameter sets	5
Parameter set list	Name
	Startpage
	IP settings:
	CSD phone no., CSD Data rate, CSD dial type
	GPRS APN, password request, allow calls, authentication, quality
	of services
	IP address
	UserId and password
	Security on/off
	Show images on/off
Manual selection	Yes, between Analog (V32) and Digital (V110)
Parameter sets include	WAP/CSD, WAP/GPRS (different sets)
Factory pre-configuration	WAP/CSD (possibility to lock a setting), WAP/GPRS
OTA	WAP/CSD, WAP/GPRS configuration possible
Simultaneous OTA	WAP/CSD, WAP/GPRS configuration possible
Single OTA	one of WAP/CSD or WAP/GPRS configuration is possible
Bookmarks	Not empty by default
URL format	Underlined
Security mechanism
OTA provisioning (if empty)	Operator verification through a code, included in the OTA data. This
	code is shown to the user who can choose installation or not.
Interface (if empty)	An Install question is asked with the code, if available.
	The user has to choose if a new WAP profile shall be created or an
	existing profile shall be replaced.
Re-provisioning (Set 1 filled)	As above
Interface (Set 1 filled)	As above

31 November 2004