White Paper J200
Service | Mode | Support in |
|
| J200 |
|
|
|
| Subaddress DTMF support | Yes |
|
|
|
| '00' = set up call, but only if not currently busy on | Yes |
| another call |
|
|
|
|
| '01' = set up call, but only if not currently busy on | Yes |
| another call, with redial |
|
|
|
|
| '02' = set up call, putting all other calls (if any) on | Yes |
| hold |
|
|
|
|
| '03' = set up call, putting all other calls (if any) on | Yes |
| hold, with redial |
|
|
|
|
| '04' = set up call, disconnecting all other calls (if any) | Yes |
|
|
|
| '05' = set up call, disconnecting all other calls (if any), | Yes |
| with redial |
|
|
|
|
SET UP IDLE MODE |
| No |
|
|
|
SET UP MENU |
| Yes |
|
|
|
SMS PP DOWNLOAD |
| Yes |
|
|
|
User interaction with SIM AT
Display text
Text of up to 240 characters (120 UCS2 coded) is supported.
Text clearing times are
‘Key’ responses:
•‘Long NO’ – Proactive session terminated by user.
•‘NO’ – Backward move in proactive session.
•Any other key clears display if the command is performed successfully.
Get inkey
Prompt for a
‘Key’ responses:
•‘CLR’ clears current character.
•‘Long NO’ terminates the proactive session.
•‘NO’ – Backward move in proactive session.
•‘YES’ – Command performed successfully.
Get input
Prompt for character input. Pressing ‘YES’ without entering a character gives warning message “Minimum ‘no.’ characters”. The phone will refuse to accept further input when the maximum response length is exceeded.
MMI Maximum Response lengths:
•Digits Only – 160 characters
•SMS default alphabet characters – 160 charac- ters
•Hidden Characters (digits only) – 11 characters
‘Key’ responses:
•‘CLR’ clears current character/characters.
•‘Long NO’ terminates the proactive session.
•‘NO’ – Backward move in proactive session.
•‘YES’ – Command performed successfully.
Refresh
When a Refresh - SIM Reset command is ececuted by the phone, it displays the message “Please wait” and then restarts.
45 | November 2004 |