Select item
Scroll to highlight item for selection. The maximum number of items supported by the phone within one Select Item command is 30.
‘Key’ responses:
•Down arrow – Scroll down list.
•Up arrow – Scroll up list.
•Long ‘NO’ terminates proactive session.
•‘NO’ – Backward move in proactive session.
•‘YES’ – Command performed successfully.
Send short message
Default message “Sending message, please wait” can be replaced by the Alpha Identifier text, or sup- pressed completely if a null text is provided. Responses are “MESSAGE FAILED” or “MESSAGE SENT”.
‘Key’ responses:
•Long ‘NO’ or ‘NO’ terminates the proactive ses- sion.
Set up call
If the ME is on a call when the command 'Set up Call, putting all other calls on hold' is sent, the user sees the text 'Setting up a call current call will be held'.
Press the 'YES' key to put current call on hold and set up new call.
White Paper J200
If the ME is on a call when the command ‘Set Up Call, disconnecting all other calls’ is sent, the user sees the text ‘Setting up a call current call will be disconnected’.
Press the ‘YES’ key to disconnect the current call and set up the new call.
Set up menu
Incorporates a SIM Application Toolkit Menu Item into the ME’s main menu structure. From the standby display, the joystick can be used to scroll to and select the Menu Items. (Note: The SIM AT menu option is found in the ‘Connectivity’ menu.)
If an Alpha Identifier is supplied in the Set Up Menu command, this is used as the SIM AT entry in the ME’s main menu. If no alpha identifier is supplied and only one item provided, then this item is used as header. If no alpha identifier is supplied and sev- eral items are found in the menu, a default title is used. If the SIM AT Menu Item is selected using the ‘YES’ key all the items sent in the Set Up Menu command are available for selection, in the same way as the Select Item command. A limit of 30 menu items has been set within this command.
‘Key’ responses:
•Joystick down – Scroll down list.
•Joystick up – Scroll up list.
•‘YES’ – Envelope (Menu Selection).
Chinese versions
The J200 comes in different Chinese versions, the J200i for Hong Kong, Singapore, Malaysia and Tai- wan, and the J200c for China Mainland. The only difference between these Chinese versions is that they support different languages and input meth- ods.
Both the J200i and the J200c contain a Lunar cal- endar.
For more information about the Chinese versions, see “Standard language configurations” on page 28.
46 | November 2004 |