Sony Ericsson M600 manual User interaction with SIM AT

White Paper M600

Service	Mode	Support
RECEIVE DATA		No
SEND DATA		No
GET CHANNEL STATUS		No

User interaction with SIM AT

Display text

Text of up to 240 characters (120 UCS coded) is supported.

Text clearing times are 5-20 seconds and a 60 sec- ond timeout limit for the user to clear the text. ‘Key’ responses:

•‘Long Back’ – Proactive session terminated by user.

•‘Back’ – Backward move in proactive session.

Any other key clears the display if the command is performed successfully.

•Hidden Characters (digits only) – 20 characters. ‘Key’ responses:

•‘C’ clears current character.

•‘Long Back’ terminates the proactive session.

•‘Back’ – Backward move in proactive session.

•‘OK’ – Command performed successfully.

Select item

Scroll to highlight item for selection. ‘Key’ responses:

Get inkey

Prompt for a one-character input. Pressing ‘Ok’ without entering a character gives warning mes- sage “Minimum 1 character”. ‘Key’ responses:

•‘C’ clears current character.

•‘Long Back’ terminates the proactive session.

•‘Back’ – Backward move in proactive session.

•‘OK’ – Command performed successfully.

Get input

Prompt for character input. The phone will refuse to accept further input when maximum response length is exceeded. UI Maximum Response lengths:

•Digits Only – 160 characters.

•SMS default alphabet characters – 160 charac- ters, or 1530 characters if concatenation is acti- vated.

•Navigational key press down – Scroll down list.

•Navigational key press up – Scroll up list.

•Long ‘Back’ terminates proactive session.

•‘Back’ – Backward move in proactive session.

•‘OK’– Command performed successfully.

Send short message

Default message “Sending message, please wait” can be replaced for the Alpha Identifier text, or sup- pressed completely if a null text is provided. Default responses are “MESSAGE FAILED” or “MESSAGE SENT”. ‘Key’ responses:

•Long ‘Back’ or ‘Back’ ends the proactive ses- sion.

81 February 2006