Sony Ericsson G35, G30 manual Installing the FWT on the Wall, Network Search, FWT Location

Page 12

Installation

Note: Once you have entered the PIN code for the first time, you will not have to enter it again unless you change your SIM card. The FWT performs this operation automatically in case of power failure.

Network Search

After you have switched on your FWT and entered the PIN, the FWT automatically searches for a network.

When a network is found, the Radio LED is on or flashes depending on the GSM signal strength.

Note: If the Radio LED is off, you do not have access to the GSM network at your present location.

Now you have prepared the FWT for wall installation. Please, follow the instructions below for complete wall installation.

Installing the FWT on the Wall

FWT Location

The GSM signal strength available at the FWT location affects the performance of the unit. The stronger the GSM signal, the better the FWT performance.

Tip: Test several potential locations by moving the FWT while looking at the Radio LED. Select the location where the Radio LED is continuous steady, or the location with the highest amount of flashes.

Note: Moving the FWT as little as 20 cm can affect the GSM reception quality.

				Location Testing
Number of Radio LED flashes					Location status
0	OFF				Unacceptable

1	-	-	-		Acceptable

2	- -	- -	- -		Good

3	- - -	- - - - - -			Very Good

Continuously …………………					Excellent

Please consider the following recommendations:

12	Fixed Wireless Terminal: G30 and G35 models

Image 12

Contents Fixed Wireless Terminal for GSM Mobile Networks User GuideEN/LZT 151 233 R1A Ericsson AB 2006 All Rights Reserved Table of Contents Welcome Disposal of the productWarranty CopyrightDeclaration of Conformity FCC StatementFixed Wireless Terminal Product DescriptionSupplied Parts List of ComponentsExternal Connector and Indicators Installation AssemblySIM Card Preparing Your FWTConnecting a telephone to the FWT Switch on the FWT Enter PINInstalling the FWT on the Wall Network SearchFWT Location Wall mounting Now the FWT is ready for connecting devices and making calls Connecting Devices to the FWT Connecting devices to the FWTInstalling the FWT as a telephone line Checking the connectionsChecking the quality of the calls Connecting the FWT to a PBX Generic requirementsG35 FWT connectivity to the analog trunk of the PBX Using telephones Advanced Features Changing VolumeCall Divert 03**OLDPASSWORD*NEWPASSWORD* NEWPASSWORD# Call Restriction / Call BarringCall waiting service Multiparty CallsMaking a Second Call Receiving a Second CallConference Calls Explicit Call Transfer Phonebook / Abbreviated DialingSending Tone Signals Alternate Line Service ALSVoice Mail Minute MinderSIM Card Security To Manage your SIM CardTo Change your PIN To Unblock your SIM Card Troubleshooting LED indicatorsEnter PIN Enter PUK Insert SIM SIM Error Fixed Wireless Terminal G30 and G35 models Audible Tones Technical Data GSM Air InterfacePower Supply FWT InterfacesBasic Kit Telephone InterfacesEnvironmental Conditions Accessories BatteryAntennas External triple band omni directional antennaBattery Cable DC/DC Power ConverterMechanical Antitheft Lock Mechanical Antitheft KeyProduct Care and Safety Product careAntenna care Radio wave exposure informationPower supply Battery informationPersonal medical devices Potentially explosive atmospheresAccessing the battery compartment Moving or Storing the FWTWarranty Limited WarrantyEricsson Warranty What Ericsson will doConditions Glossary NumberSIM Index Fixed Wireless Terminal G30 and G35 models