Sony Ericsson G30 manual G35 FWT connectivity to the analog trunk of the PBX

Page 18

Connecting Devices to the FWT

•The PBX can be programmed to utilize Least Cost Routing (LCR), if available, to automatically choose the trunk where the G35 FWT is connected.

•If the PBX does not offer LCR, choose the trunk where the FWT is connected manually with a special dialed prefix. Check the installation in the same way as before.

The G35 FWT is compatible with most analog PBXs on the market.

G35 FWT connectivity to the analog trunk of the PBX

If the PBX fulfils the requirements for FWT connectivity, listed above, follow all the installation steps as described in the topic Installing the FWT on the Wall documented on page 12.

Note: A minimum distance of 3 meters between the G35 FWT and the PBX is recommended. The cable distance between the PBX and the G35 FWT should not exceed 600 meters, and the connection cable should be at least 0.4mm2 in diameter.

Warning: If you install more than one G35 FWT to a PBX, their antennas have to be separated by 20 cm in height or 2 meters in the horizontal.

If you are using an analog PBX — disconnect the telephone you have used to enter the PIN and test the FWT, and connect the analog trunk cable from the PBX to the FWT telephone line interface.

Check your PBX programming guide to see how to program your PBX to route certain calls through the FWT trunk if you are using a Least Cost Routing (LCR) programmed PBX. Once LCR is programmed, make a call to a mobile telephone number. See if the call is established through the FWT and check the speech quality.

18	Fixed Wireless Terminal: G30 and G35 models

Image 18

Contents Fixed Wireless Terminal for GSM Mobile Networks User GuideEN/LZT 151 233 R1A Ericsson AB 2006 All Rights Reserved Table of Contents Welcome Disposal of the productDeclaration of Conformity WarrantyCopyright FCC StatementFixed Wireless Terminal Product DescriptionSupplied Parts List of ComponentsExternal Connector and Indicators SIM Card InstallationAssembly Preparing Your FWTConnecting a telephone to the FWT Switch on the FWT Enter PINInstalling the FWT on the Wall Network SearchFWT Location Wall mounting Now the FWT is ready for connecting devices and making calls Connecting Devices to the FWT Connecting devices to the FWTInstalling the FWT as a telephone line Checking the connectionsChecking the quality of the calls Connecting the FWT to a PBX Generic requirementsG35 FWT connectivity to the analog trunk of the PBX Using telephones Advanced Features Changing VolumeCall Divert 03**OLDPASSWORD*NEWPASSWORD* NEWPASSWORD# Call Restriction / Call BarringCall waiting service Multiparty CallsMaking a Second Call Receiving a Second CallConference Calls Explicit Call Transfer Phonebook / Abbreviated DialingVoice Mail Sending Tone SignalsAlternate Line Service ALS Minute MinderSIM Card Security To Manage your SIM CardTo Change your PIN To Unblock your SIM Card Troubleshooting LED indicatorsEnter PIN Enter PUK Insert SIM SIM Error Fixed Wireless Terminal G30 and G35 models Audible Tones Technical Data GSM Air InterfaceBasic Kit Power SupplyFWT Interfaces Telephone InterfacesEnvironmental Conditions Antennas AccessoriesBattery External triple band omni directional antennaMechanical Antitheft Lock Battery CableDC/DC Power Converter Mechanical Antitheft KeyProduct Care and Safety Product careAntenna care Radio wave exposure informationPersonal medical devices Power supplyBattery information Potentially explosive atmospheresAccessing the battery compartment Moving or Storing the FWTEricsson Warranty WarrantyLimited Warranty What Ericsson will doConditions Glossary NumberSIM Index Fixed Wireless Terminal G30 and G35 models