
Installation
Switch on the FWT
Connect the power supply. The FWT switches on automatically and the
LED indicators start flashing.
Note: If the Power LED is off, there is a problem with the power supply. Please refer to the topic Troubleshooting documented on page 28 for more detailed information.
Enter PIN
Most SIM cards are protected with a PIN (Personal Identity Number), which you get from your network operator and which you need in order to access the network. If the SIM card is not protected by a PIN code, then you do not need to enter a PIN.
The FWT starts the network search automatically. If the SIM card is protected by the PIN code, then the LEDs will flash simultaneously.
Please follow these steps before you enter your PIN:
1.Pick up the telephone and dial the PIN code. Press the # key on your telephone or wait until you hear a beep tone.
2.If you make a mistake while entering your PIN, hang up the telephone and try again.
If the PIN is correct, you will hear a beep over the telephone (positive indication tone). If it is incorrect, a deep tone will sound (error indication tone).
If the PIN is entered incorrectly three times, the SIM card will be blocked. If this happens, you can unblock it by using the PUK (Personal Unblocking Key), which you also may get from your network operator. Please refer to the topic SIM Card Security documented on page 26 for more detailed information.
Fixed Wireless Terminal: G30 and G35 models | 11 |