Siemens C56 manual Setup71, WAP profile settings

Setup71

WAP profile settings

Up to 5 WAP profiles can be set (may be barred by the service provider). The entries may vary depending on your service provider. To set a new profile:

Select profile.

§Edit§ Open menu.

Select profile range and make your settings/en- tries field by field.

§Edit§ The entry card is dis- played.

If necessary, check with your service provider for details:

Profile Enter/change name. name:

WAP Pa- IP address: * Enter IP rameters address.

Port: * Enter port number.

Homepage: Enter homepage (p. 40), if not set by the service provider.

Linger time: Enter time in seconds after which a connec- tion should be ended if no in- put or data exchange takes place.

*) depends on the service provider, if necessary enter 2nd IP address and 2nd port.

CSD set-	Dial-up no.: Enter ISP
tings	number.
(Circuit	Call type: Select ISDN or
Switched	Analogue.
Data)	Login name: Enter login
	name.
	Password: Enter password
	(shown as a series of
	asterisks).
GPRS	GPRS deactivated: Yes/No.
settings	APN: Enter the address of
(General
	your service provider.
Packet	Login name: Enter login
Radio
	name.
Service)
	Password: Enter password
	(shown as a series of
	asterisks)
§Save§	The settings are stored
	and the profile list is
	shown.
	Activate the set WAP
	profile (p. 42).