left page (12) of CF62 Leopard TMO SUG us,
VAR Language:
12 | Phone overview |
en; VAR issue date: 040413
1Loudspeaker
2Color Display
3Soft keys
The current functions of these keys are shown in the bottom line of the display as §Text§/ symbol (e.g., Q).
4 Input keys
5*Ringtone
•Hold down in standby mode: Switch all audible signals on/off (except alarm).
•Hold down on incoming call: Switch off ring tone for this call only.
Holding down the # key in standby mode: Switch all audible signal on/off (except Alarm).
6 Plug socket
For charger, headset, camera etc.
7 Dynamic Light
_g
Service provider 01.05.2004 10:10 Pict. Msg Menu
TMO\en\sug\A65_Overview.fm
Seven LEDs are used to visually indicate dif- ferent events and functions as well as the cur- rent phone status, e.g. network searching, battery low, etc. (set, page 47).
You can set the visual signal (LEDs) on the phone for certain functions and events. The LEDs then flash in different rhythms depend- ing on the current function.
Siemens AG 2003, M:\Mobil\R65\CF62_