Siemens Mobile Getting started, Insert SIM card/battery, Additional information

Startup.fm

left page (15) of CF62 Leopard TMO SUG us, A31008-H6050-A40-1-4A19 (02.06.2004, 16:08)

					VAR
		Getting started	15		Language:
Getting started		sideways 4, then press down-
	•	Insert the battery into the phone			en;
Insert SIM card/battery		wards 5 until it snaps into place.			VAR
					issue
The service provider supplies you
					date:
with a SIM card on which all the
important data for your line is		4		040413
delivered in credit card size, snap the
stored. If the SIM card has been
smaller segment out and remove		5
any rough edges.
Press grooved area 1, then remove	•	To remove, press the retaining tab
the cover downwards in the direc-
tion of the arrow 2.		on the side of the battery, then lift
		the battery out.
1
	•	Place cover on phone and then
		push towards the upper edge,
		until it clicks into place 6.
2

© Siemens AG 2003, M:\Mobil\R65\CF62_TMO\en\sug\A65_

•Place the SIM card in the slot with the contact surface facing down- wards. Gently push the holder tab over the SIM card 3 (ensure the beveled corner is correctly posi- tioned).

3

6

Additional information

Please switch off your phone before removing the battery!

3 V and 1.8 V SIM cards are supported. Please contact your service provider if you have an older card.

SIM card problems page 63