54
Tones setup
First
Enter the Setup menu by pressing »MENU«
Select »Tones setup«
Create melody (Continued)
•Tones sound: Select whether you want to hear the tones or not when composing your melody. Even if you have switched the tones sound off, you will still be able to listen to your composition by pressing 8 (Play back).
•Save: Give your melody a name and press »SAVE«. If you do not want to give the melody a name of your own choice, it will be stored under the name »My melody 1«.
If you press »EXIT« after complet- ing your composition, you will be asked whether you want to leave the composer without saving your new/edited melody.
Press »NO« to return to the com- poser editor where you can make further corrections, if required.
Press »YES« to leave the com- poser without saving anything.
Setup menu
Key tone
Select whether you want a tone to be heard when you press a key. You can select between 7 different tones, DTMF and off.
Silent mode
Choose whether you want the selected tones to be on or off.
Trembler
Select whether you want the built- in trembler to be active at incoming calls, messages, or events.
Setup menu
Factory settings
Ringing tone
- volume: High
-pattern, line 1: Standard 2
-pattern, line 2: British 1 Message tone
- volume: | High |
- pattern: | Simple 1 |
Broadcast tone |
|
- volume: | High |
- pattern: | Discreet |
Key tone: | Keytone 1 |
Trembler |
|
- Line 1: | On |
- Line 2: | On |
- Messages: | Off |
- Broadcasts: | Off |
- Events: | On |
55
Facts & Tips
•If you are interrupted while compos- ing your melody, e.g. by an incoming call, your composition will be stored under the name »Backup«.
•Remember that you can disable all selected tones by pressing »MENU« and then 
. Just press these keys again in the same order to revert to your original settings.
•Returning to the factory settings will not affect the ringing tone assigned to a group in your address book.