56
Phone setup
First
Enter the Setup menu by pressing »MENU«
Select »Phone setup«
Language
Select »Language« to change the menu language of your phone.
IrDA
Under »IrDA Nickname« you can enter an ID name by which you want other IrDA devices to identify your mobile phone.
By selecting »Printer« you get the option to define the protocol language of the printer you want to use.
If you select »Test page«, a stan- dard test page will automatically be sent to the printer.
Backlight
To save your battery and thus increase both conversation and standby times you can choose to have the backlight permanently switched off.
Handsfree
This option is effective only if your phone is connected to a handsfree device. See specific user guides for further information.
Greeting
Make a welcome greeting on your phone according to your own wish- es. Delete the old greeting by hold- ing down »CLEAR«, enter the new greeting via the keypad, and con- firm by pressing »OK«. (This func- tion may not be available on all net- works).
S
Setup menu
Signal diode
The LED on the top of the phone
provides information about the fol-
lowing:
•Green flash
In contact with a network
•Fast green flash Incoming call
•Very fast green flashes New information, e.g.
a missed call or a new message.
•Red flash
No contact with a network
•Fast red flash Low battery
Select individually whether you
want these indicators to be active
or not.
Setup menu
Graphics
This submenu allows you to choose between different symbols for the battery and the signal strength indicators.
Owner ID
You can store an owner ID in your phone to be shown when you switch on the phone. Select »Define« to enter the necessary information, which corresponds to an address book entry.
Select »Show at power up« to activate/deactivate the function. When the function is activated press »OWNER« during the power up phase to see the contents of your owner ID.
The contents of the Owner ID can be sent as a business card via IrDA (see p. 33).
57
Facts & Tips
•If, by mistake, you select a language which you do not understand, you can always return to the original SIM card language by pressing the following
keys: 0000 , in standby mode.
•The owner ID is stored in the inter- nal memory of the phone and will thus not be shown in the display if you use your SIM card in another phone.