Message setup, Call types fax/data, Line selection

Setup menu

Call setup

First

Enter the Setup menu by pressing »MENU«

Select »Call setup«

Call types (fax/data)

This menu is relevant only if you are using your phone for fax and data communications!

The settings on this menu should be changed only in connection with fax and data transmissions, if ne- cessary. Fax and data capability will require a separate data interface kit (optional). The menu settings are explained in the user guide sup- plied with this kit.

Line selection

Some network operators offer Alternate Line Service. This allows you to use two separate speech lines and phone numbers on the same telephone. If you have two separate lines, you can switch between these by entering this sub menu

Facts & Tips

•In the standby display a small num- ber on the left or right-hand side of the signal strength indicator informs you whether you are on line one or line two (only if you have Alternate Line Service).

Message setup

First

Enter the Setup menu by pressing »MENU«

Select »Message setup«

Send SMS setup

To be able to send and receive SMS messages you must store the name and number of the service centre of your network operator. However, many network operators will already have stored this infor- mation and some other necessary parameters for you on your SIM card.

Service centre The service centre is where your SMS messages are forwarded to the recipient. Select- ing this submenu gives you the fol- lowing options:

View centres: A list of already defined service centres will be pre- sented to you. Press »OPTION« if you want to edit or delete one of the service centres.

Under the edit option you can change the name and number of the service centre, enter a destina- tion number to which you want your messages to be sent, change the validity time and teleservice type.

Default centre: Select the service centre through which you want your messages to be sent. If you select »No default«, you will be asked to enter the service centre number, validity time and teleser- vice type each time you send a message.

Contact your network operator to get the service centre number if it is not stored on your SIM card, and then proceed as follows:

Select »Add new centre« and press »OK«.

Press »EDIT«.

Enter the service centre name and press »OK«.

Enter the service centre num- ber, destination number, and select the validity time and teleservice type in the same way.

Press »SAVE«.

Facts & Tips

•Remember to add "+" and the national code before the number of your service centre so you can also send SMS messages from abroad.

•If you often send messages to the same number it is an advantage to store this as your »Destination num- ber«. You will thus only have to con- firm and not reenter the number each time you want to send a message.

•The validity time is the period of time that an SMS message will remain with your service centre if for some reason it cannot be delivered right away.