8 | Getting started |
Charging
The battery is not fully charged when delivered, so:
•Plug in charger cable at the bot- tom of the phone, plug in the power supply unit to the mains power socket and charge for at least two hours.
•Push the sides of the charger cable plug together and pull to remove it.
Display when charging is in progress
`When charging is in progress.
eEnd of charging.
Charging time
An empty battery is fully charged af- ter about 2 hours. Charging is only possible in an ambient temperature of 5°C to 40°C (the charge icon flash- es as a warning when the tempera- ture is 5°C above/below this range). The voltage specified on the power supply must not be exceeded.
Charge icon not visible
If the battery is totally discharged no charge icon is displayed when the charger is plugged in. It will appear after two hours at most. In this case the battery is fully charged after
Only use the charger provided!
Display while in service
Charge level display during opera- tion
a}b{c
A beep sounds when the battery is nearly empty.
Note
The charger heats up when used for long periods. This is normal and not dangerous.
Operating times | p. 76 |
Battery care (only NiMH) | p. 62 |
Quality declaration for battery | p. 76 |