Siemens M50 manual 68Setup, WAP profile settings

Select a profile. Open menu.

68Setup

§Menu§ ¢ Setup

¢ Connectivity

¢ Select a function:

WAP profile settings

You can set or change up to 5 WAP profiles (may be barred by the serv- ice provider). The entries may vary depending on your service provider. To set a new profile:

N

§Options§

Change settings

Select and confirm.

N Select profile range and make your settings/en- tries field by field.

§Edit§ The entry card is dis- played.

If necessary, check with your service provider for details:

WAP pa-	IP address: * Enter IP ad-
rameters	dress.
~	Port: * Enter port number.
	Homepage: Enter homepage
	(p. 32), if not set by the service
	provider.
	Linger time: Enter time in
	seconds after which a connec-
	tion should be terminated if no
	input or data exchange takes
	place.
	*) depends on your service
	provider, if necessary enter
	2nd IP address and 2nd port

CSD	Dial-up no.: Enter ISP
settings	number.
(Circuit	Call type: Select ISDN or An-
Switched
Data)	alogue.
	Login name: Enter login
	name.
	Password: Enter password
	(shown as a series of aster-
	isks).
GPRS	activated/deactivated: Acti-
settings	vate/deactivate
(General	APN: Enter the address of
Packet
	your service provider.
Radio
	Login name: Enter login
Service)
	name.
	Password: Enter password
	(shown as a series of aster-
	isks)
§Save§	The settings are stored
	and the profile list is
	shown.
	Activate the set WAP pro-
	file (p. 34).

Note

As an alternative method to set/change a new profile, you can use the browser menu:

†Call up the menu.

More ... Select.

WAP Profiles

Select.