Getting started
Battery installation
After you install the handset battery, the handset will prompt you to set the date and time. The handset will also prompt you to set the date and time after a power failure. For instructions, see Set date and time on page 9. To skip, press OFF/CANCEL.
Install the battery as shown below.
1.Plug the battery connector securely into the socket inside the handset battery compartment.
2.Place the battery with the label THIS SIDE UP facing up and the wires inside the battery compartment.
3.Align the cover flat against the battery compartment, then slide it towards the center of the handset until it clicks into place.
4.Charge the handset by placing it in the telephone base. The CHARGE light remains on whenever the handset is charging in the telephone base.
1 | 2 |
34
CHARGE
light
CANCEL
• If the handset will not be used for a long period of time, disconnect and remove the battery to prevent any possible leakage.
•To purchase a replacement battery, visit our website at www.vtechphones.com or call 1 (800)