VTech CS6114 user manual Appendix, Display screen messages

Page 26

Appendix

Display screen messages

Call log empty	There are no call log entries.

Directory empty	There are no directory entries.

Directory full	The directory is full.

Ended X:XX:XX	You have just ended a call.

Incoming call	There is an incoming call.

Line in use	Another telephone on the same line is in use.

Low battery	The battery needs to be recharged.

Microphone on	MUTE is turned off and the person on the other end can
	hear you.
Muted	You have turned off the handset microphone. The other
	party cannot hear you but you can hear the other party.
New voicemail	There are new voicemail message(s) from the
	telephone service provider.
No battery	No battery is installed. Follow the directions for
	battery installation on page 3 to install the battery
	before charging.
No line	There is no telephone line connected.

No signal	Communication between the handset and telephone
	base is lost during a call.
Not registered	The handset may be deregistered from the telephone
	base. Follow the instructions on page 26 to register the
	handset to the telephone base.
Out of range or	The handset cannot communicate with the telephone
no pwr at base	base. Check the telephone base power connection or
	move the handset closer to the telephone base.
Phone X:XX:XX	The handset is on a call.
Place in charger	The battery is very low. Place the handset in the
	telephone base for recharging.
Ringer muted	The handset ringer is muted temporarily during an
	incoming call.
Ringer off	The handset ringer is turned off.

Saved	Your selection has been saved.

XX missed calls	There are calls that have not been reviewed in the
	call log.
Paging	The system handset is being paged.

23

Image 26

Contents Online user’s manual Congratulations Table of contents Parts checklist Getting startedTelephone base installation Wall mountingBattery installation ChargeBattery charging Telephone base layoutHandset layout CID/VOLMENU/SELECT Ringer volume Telephone settingsUsing the menu Ringer toneLCD language To change the settingTo manually turn off these indicators Clear voicemailKey tone Set date and timeWebsite Dial modeHome area code Telephone operation Find handset Temporary ringer silencingTemporary tone dialing Review the redial list Chain dialingRedial list Directory Dial a redial entryDelete a redial entry Add a directory entry To search the directory Character chartReview the directory Edit a directory entry Alphabetical searchDial a directory entry To start an alphabetical searchInformation about caller ID with call waiting Delete a directory entryAbout caller ID Missed call indicator Call logView dialing options Memory matchReview the call log Dial a call log number Save a call log entry to the directoryDelete the call log entries Call log display screen messagesAppendix Display screen messagesTelephone base light Handset and telephone base indicatorsHandset light Handset screen iconsBattery Battery needs charging whenThere is no dial tone TroubleshootingMy telephone does not work at all Cannot dial outCharge light is off Low battery shows on the handset screenTelephone does not ring when there is an incoming call Hear noise on the cordless handset and the keys do not work Hear other calls when using the telephoneMy handset beeps and is not performing normally My caller ID features are not working properly Out of range or no pwr at base shows on the handset screenCannot retrieve voicemail messages Common cure for electronic equipmentImportant safety instructions Operating range Precautions for users of implanted cardiac pacemakersMaintenance About cordless telephones Rbrc sealWarranty What does this limited warranty cover?FCC Part FCC Part 68 and Acta Technical specifications Index Index

Related manuals

Manual 43 pages 26.34 Kb