•Make sure the wall material is capable of supporting the weight of the base and handset.
•Use #10 screws (minimum length of
material where the base unit will be placed.
1)Insert two mounting screws into the wall (with their appropriate anchoring device),
2)Refer to steps 1 through 5 on page 13 to mount the telephone.
Installing the Belt Clip
To attach the belt clip
Insert the belt clip into the holes on each side of the handset. Press down until it clicks.
To remove the belt clip
Pull both sides of the belt clip to release the tabs from the holes.
Headset Installation
Your phone may be used with an optional headset. To use this feature, insert the headset plug into the headset jack. Your phone is ready for
14