Uniden EXI5660 Series manual Liquid Damage, Handset Base

Page 38

Liquid Damage

Moisture and liquid can damage your cordless phone.

If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal.

If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base), follow the steps below:

 

Handset

 

Base

1)

Remove the battery cover and leave it off for ventilation.

 

 

2)

Disconnect the battery pack. Leave the battery cover off

1)

Disconnect the AC adapter from the base,

 

and the battery pack disconnected for at least 3 days.

 

 

cutting off electrical power.

3)

Once the handset is completely dry, reconnect the

 

2)

Disconnect the telephone cord from the base.

 

battery pack and the battery cover.

 

3)

Let dry for at least 3 days.

4)

Recharge the handset's battery pack for 15 to 20 hours

 

 

 

before using.

 

 

IMPORTANT:

You must unplug the telephone line while recharging the battery pack to avoid charge interruption.

CAUTION:

DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven. After following these steps, if your cordless telephone does not work, please call our Customer Service Hotline. See back cover page for contact information.

37

Image 38
Contents Page To Make a Call Para hacer una llamada Contents Accessibility WelcomeTerminology Manual ConventionsMain Phone Features Product OverviewControls and Functions HandsetTEL Line jack Main Base UnitFind hs key Installing the Phone Choosing the Best LocationInstalling the Rechargeable Battery Pack into the Handset Installing the Base Unit Page Mounting the Base Unit on a Wall Direct wall mountingTo attach the belt clip Installing the Belt ClipHeadset Installation To remove the belt clipActivating Caller ID on Call Waiting Basic SetupActivating AutoTalk Programming Your Area Code Choosing the Dialing Mode Setting the Language Using the Speed Dial Memory Storing a Name and Number in MemoryNumber of times key is pressed If you make a mistake while entering a name Storing Caller ID in Speed Dial Memory Press select. The display returns to the Caller ID listMaking a Call from Speed Dial Memory Using Your PhoneMaking and Receiving Calls To cancel speed dialing Making a Call from the Caller ID ListRedialing the Last Dialed Number Selecting the Ring Tone and VolumeAdjusting the Earpiece Volume Temporarily Mute RingerFind Handset Using Call WaitingSelecting a Different Channel To access your voice mailbox Tone Dialing Switch-overVoice Mail Waiting Indicator Caller ID and Cidcw Caller ID on Call Waiting Caller ID on Call Waiting Cidcw Viewing the Caller ID Message ListDeleting all Caller ID names/numbers Deleting Information from the Caller ID ListDeleting a Caller ID message Press delete/channelChanging the Digital Security Code Power Failure MaintenanceSpecifications Low battery alert Talk and Standby TimesBattery replacement and handling Cleaning the battery charging contactsSymptom Suggestion Charge/in use LED wont TroubleshootingCommon Issues Traveling Out-of-RangeSymptom Suggestion Liquid Damage Handset BasePrecautions Rechargeable Nickel-Cadmium Battery WarningImportant Safety Instructions FCC Wants You To KnowRadio Interference Shown on the labelRadio Equipment Cordless Telephone PrivacyTerminal Equipment One Year Limited Warranty O, P, Q IndexG, H, I, J, K, L X, Y, ZMemo Memo At Uniden, we’ll take care of you