Uniden DX15686 Series manual Symptom Suggestion

Page 38

	Symptom	Suggestion
		• Re-register all handsets (see page 13).
		• Check both ends of telephone line cord.
		• Make sure the AC adapter is plugged into the base and wall outlet.
	Can’t make or receive calls.	• Disconnect the AC adapter for a few minutes, then reconnect it.
		• Change the digital security code (see page 32).
		• Make sure that the handset is not too far from the base.
		• Check the dialing mode used by your telephone company.
		• Re-register all handsets (see page 13).
		• The battery pack may be weak. Charge the battery for 15-20 hours.
	The handset doesn’t ring or	• The handset may be too far away from the base unit.
	The handset doesn’t ring or	• Place the base unit away from appliances or metal objects.
	receive a page.
	receive a page.	• Change the digital security code (see page 32).
		• Change the digital security code (see page 32).
		• Check the battery pack to ensure there is a secure connection.
		• Make sure ringer volume isn’t set to "off."
		• Keep all handsets away from microwave ovens, computers, remote control toys,
	Severe noise interference.	wireless microphones, alarm systems, intercoms, room monitors, fluorescent
	Severe noise interference.	lights, and electrical appliances.
		lights, and electrical appliances.
		• Move the base to another location or turn off the source of interference.

37

Image 38

Contents Page Contents Accessibility WelcomeTerminology Manual ConventionsMain Phone Features Product OverviewControls and Functions HandsetsTEL Line jack Main Base UnitFind hs key Installing the Phone Choosing the Best LocationInstalling the Rechargeable Battery Packs into the Handsets Installing the Base Unit and Charging Cradles Modular Mounting the Base Unit on a Wall Direct wall mountingTo attach the belt clip Installing the Belt ClipHeadset Installation To remove the belt clipRegister Handsets to the Main Base before Using When to Re-register Handsets Basic Setup Activating AutoTalkActivating Caller ID on Call Waiting HS1 only Programming Your Area CodeChoosing the Dialing Mode HS1 only Setting the Language Using the Speed Dial Memory Storing a Name and Number in MemoryNumber of times key is pressed If you make a mistake while entering a name Storing Caller ID in Speed Dial Memory Making a Call from Speed Dial Memory Using Your PhoneMaking and Receiving Calls To cancel speed dialing Making a Call from the Caller ID ListTo receive a transfer call Transferring a CallTo transfer a call HS1 display onRedialing the Last Dialed Number Selecting the Ring Tone and VolumeAdjusting the Earpiece Volume Temporarily Mute RingerFind Handset Using Call WaitingSelecting a Different Channel To access your voice mailbox Tone Dialing Switch-overVoice Mail Waiting Indicator Caller ID and Cidcw Caller ID on Call Waiting Caller ID on Call Waiting Cidcw Viewing the Caller ID Message ListDeleting all Caller ID names/numbers Deleting Information from the Caller ID ListDeleting a Caller ID message Press delete/transferChanging the Digital Security Code Power Failure MaintenanceSpecifications Low battery alert Talk and Standby TimesBattery replacement and handling Cleaning the battery charging contactsSymptom Suggestion Charge/in use LED or TroubleshootingCommon Issues Traveling Out-of-RangeSymptom Suggestion Call was answered before the second ring Liquid Damage Handset BasePrecautions Rechargeable Nickel-Cadmium Battery WarningImportant Safety Instructions FCC Wants You To KnowRadio Interference Radio Equipment Cordless Telephone PrivacyTerminal Equipment One Year Limited Warranty K, L IndexG, H O, P, QAt Uniden, we’ll take care of you