Uniden DX15686 Series manual Talk and Standby Times, Low battery alert

Page 35

Talk and Standby Times

With average use, your handset battery provides approximately six hours of talk time and approximately ten days of standby time. When your handset is not being used and is left off of the charging cradle the battery will gradually discharge. You can achieve optimum battery life and performance by returning the handset to the charging cradle after each use. If the handset is left off of the charging cradle, the actual talk time duration will be reduced respective to the amount of time the handset is off of the charging cradle.

Low battery alert

When the battery pack is very low and needs to be charged, the phone is programmed to

eliminate functions in order to save power. If the phone is not in use, LOW BATTERY appears on the LCD and none of the keys will operate. During a call, LOW BATTERY flashes and the

handset beeps. Complete your conversation as quickly as possible and return the handset to the cradle for charging.

Note: Information stored in the phone's memory will be retained for thirty minutes after the battery pack is removed. This includes all setup information, last number dialed, speed dial memory, and the CID list.

Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum performance, be sure to return the handset to the cradle after a telephone call.

34

Image 35
Contents Page Contents Welcome AccessibilityManual Conventions TerminologyProduct Overview Main Phone FeaturesHandsets Controls and FunctionsTEL Line jack Main Base UnitFind hs key Choosing the Best Location Installing the PhoneInstalling the Rechargeable Battery Packs into the Handsets Installing the Base Unit and Charging Cradles Modular Direct wall mounting Mounting the Base Unit on a WallTo remove the belt clip Installing the Belt ClipHeadset Installation To attach the belt clipRegister Handsets to the Main Base before Using When to Re-register Handsets Activating AutoTalk Basic SetupProgramming Your Area Code Activating Caller ID on Call Waiting HS1 onlyChoosing the Dialing Mode HS1 only Setting the Language Storing a Name and Number in Memory Using the Speed Dial MemoryNumber of times key is pressed If you make a mistake while entering a name Storing Caller ID in Speed Dial Memory Making a Call from Speed Dial Memory Using Your PhoneMaking and Receiving Calls Making a Call from the Caller ID List To cancel speed dialingHS1 display on Transferring a CallTo transfer a call To receive a transfer callTemporarily Mute Ringer Selecting the Ring Tone and VolumeAdjusting the Earpiece Volume Redialing the Last Dialed NumberFind Handset Using Call WaitingSelecting a Different Channel To access your voice mailbox Tone Dialing Switch-overVoice Mail Waiting Indicator Caller ID and Cidcw Caller ID on Call Waiting Viewing the Caller ID Message List Caller ID on Call Waiting CidcwPress delete/transfer Deleting Information from the Caller ID ListDeleting a Caller ID message Deleting all Caller ID names/numbersChanging the Digital Security Code Power Failure MaintenanceSpecifications Talk and Standby Times Low battery alertCleaning the battery charging contacts Battery replacement and handlingTraveling Out-of-Range TroubleshootingCommon Issues Symptom Suggestion Charge/in use LED orSymptom Suggestion Call was answered before the second ring Handset Base Liquid DamageRechargeable Nickel-Cadmium Battery Warning PrecautionsFCC Wants You To Know Important Safety InstructionsRadio Interference Radio Equipment Cordless Telephone PrivacyTerminal Equipment One Year Limited Warranty O, P, Q IndexG, H K, LAt Uniden, we’ll take care of you