Uniden DX15686 Series manual Call was answered before the second ring

Page 39

Symptom

Suggestion

 

• The call was answered before the second ring.

The Caller ID does not

• The call was placed through a switchboard.

• Charge the handset.

display.

• Your Caller ID service may not be active; contact your local telephone service

 

 

provider.

A handset is not working.

• Make sure the battery pack is connected to the handset and fully charged.

Re-register the non-functional handset.

 

Unavailable message is

• Make sure the other handset is not already in use. Two or more handsets cannot

be in talk at the same time.

displayed on the LCD screen

• Place the handset in the base for at least five seconds to re-register to the base.

of the handset.

• Make sure the handset is not too far from the base when trying to use.

 

The handset doesn’t

 

communicate with the base or

Re-register all handsets (see page 13).

the other handset.

 

No three-way conversation.

• Only one handset at a time can talk with an outside caller. To allow the other

handset to talk to the caller, transfer the call.

 

Voice Message Indication

• Contact your local telephone company to make sure that your telephone receives

FSK message signaling.

does not work.

• Reset the indicator by pressing and holding [find hs] for five seconds.

 

38

Image 39
Contents Page Contents Welcome AccessibilityManual Conventions TerminologyProduct Overview Main Phone FeaturesHandsets Controls and FunctionsMain Base Unit Find hs keyTEL Line jack Choosing the Best Location Installing the PhoneInstalling the Rechargeable Battery Packs into the Handsets Installing the Base Unit and Charging Cradles Modular Direct wall mounting Mounting the Base Unit on a WallTo remove the belt clip Installing the Belt ClipHeadset Installation To attach the belt clipRegister Handsets to the Main Base before Using When to Re-register Handsets Activating AutoTalk Basic SetupProgramming Your Area Code Activating Caller ID on Call Waiting HS1 onlyChoosing the Dialing Mode HS1 only Setting the Language Storing a Name and Number in Memory Using the Speed Dial MemoryNumber of times key is pressed If you make a mistake while entering a name Storing Caller ID in Speed Dial Memory Using Your Phone Making and Receiving CallsMaking a Call from Speed Dial Memory Making a Call from the Caller ID List To cancel speed dialingHS1 display on Transferring a CallTo transfer a call To receive a transfer callTemporarily Mute Ringer Selecting the Ring Tone and VolumeAdjusting the Earpiece Volume Redialing the Last Dialed NumberUsing Call Waiting Selecting a Different ChannelFind Handset Tone Dialing Switch-over Voice Mail Waiting IndicatorTo access your voice mailbox Caller ID and Cidcw Caller ID on Call Waiting Viewing the Caller ID Message List Caller ID on Call Waiting CidcwPress delete/transfer Deleting Information from the Caller ID ListDeleting a Caller ID message Deleting all Caller ID names/numbersChanging the Digital Security Code Maintenance SpecificationsPower Failure Talk and Standby Times Low battery alertCleaning the battery charging contacts Battery replacement and handlingTraveling Out-of-Range TroubleshootingCommon Issues Symptom Suggestion Charge/in use LED orSymptom Suggestion Call was answered before the second ring Handset Base Liquid DamageRechargeable Nickel-Cadmium Battery Warning PrecautionsFCC Wants You To Know Important Safety InstructionsRadio Interference Cordless Telephone Privacy Terminal EquipmentRadio Equipment One Year Limited Warranty O, P, Q IndexG, H K, LAt Uniden, we’ll take care of you