4.Scroll to one of the following sequence types and press Select:
Access no.+ phone no.+ card no.
— Dial access number, phone number, then card number (+ PIN if required)
Access no.+ card no.+ phone no.
—Dial access number, card number (+ PIN if required), then phone number
Prefix+ phone no.+ card no. — Dial the prefix (numbers that must precede the phone number) and phone number you want to dial, then card number (+ PIN if required)
5.Enter the required information (access number or prefix and card number), and press OK to confirm your entries.
6.Scroll to Card name, and press Select.
7.Enter the card name, and press OK.
Note: Contact your calling card company for more information.
Make calls
After you have saved your calling card information in your phone, you can make a call using your calling card.
1.At the standby screen, select Menu > Settings > Call settings > Calling card and press Select.
S e t t i n g s ( M e n u 4 )
2.Enter your security code, and press OK. (See "Change the security code" on page 42.)
3.Scroll to the calling card of your choice, select Options > Select > OK.
4.Press the End key to return to the standby screen; then enter the phone number, including any prefix (such as 0 or 1), that your calling card may require when you make a calling card call.
See your calling card for instructions.
5.Press and hold the Send key for a few seconds until Card call is displayed.
6.When you hear the tone or system message, press OK.
Data/fax calls
Data or fax calls is a Network Service. See "Network services" on page viii for more information.
If your wireless service provider supports this feature, then you can set up the phone to send or receive data or fax calls when a terminal, such as a PDA or PC, is connected.
For better performance during data calls, place the phone on a stationary surface. Do not move the phone by holding it in your hand during a data call.
Copyright © 2004 Nokia. All rights reserved. | 35 |