Introduction, Contents | Azden ASP 25 specs

(7)Level:

Turn clockwise to increase, or counterclockwise to decrease the input level. A small screwdriver is supplied to make adjustments. The level control is factory-preset in the center position.

NOTE: Remove the battery if the transmitter will not be used for a long period of time.

32BT Body-pack transmitter with lavalier microphone:

(1)Open the battery compartment lid by sliding it in the direction indicated and raising it.

(2)Insert one fresh Alkaline 9-volt battery into the compartment. Make sure battery polarity is correct.

(3)Frequency Label

The Frequency label indicates what frequency (in MHz) the transmitter broadcasts on. The AZDEN receiver in use must also be on the same frequency.

(4)Audio Input Level Control

Turn clockwise to increase, or counterclockwise to decrease the input level. A small screwdriver is supplied to make adjustments. The level control is factory-preset in the center position.

Introduction

Congratulations. You have chosen one of the most versatile powered loudspeaker systems on the market today. The Azden® APS 25 is a so- phisticated 4-channel mixable speaker system that allows you to utilize two different wireless inputs in addition to a wired microphone and a line- level input - all at the same time if needed. The master, front mounted, volume knob controls the overall level of all four inputs simultaneously.

Housed in a high-impact polycarbonate cabinet, the APS 25 can be wall mounted using the included bracket, stand-mounted or simply placed wherever needed. The Auto On/Off circuitry makes using the APS 25 simple and convenient.

To get the most from your new APS 25 Speaker System be sure to carefully read this user’s guide, paying particular attention to the receiver module(s) installed and the transmitter(s) you’ve chosen.

Again, congratulations, and thanks for choosing Azden®.

Cautions and Safety Information	inside front cover
Introduction	page	1
APS 25 rear panel diagrams	page	2
Installing an APS module	page	3
APS 25 inputs/output and controls	page 3-4
Mounting the APS 25	page	4
Using APS VR module and VHF transmitters	page 5-9
Specifications	back cover

page 8	APS VR VHF receiver module	page 1