
On Screen Icons
The phone screen displays several onscreen icons which appear when the phone is powered on.
Icons | Descriptions |
|
|
Displays the strength of the signal received by the phone and current signal strength is indicated by the number of bars displayed on the screen.
No service
The phone is not receiving a system signal.
In use
A call is in progress.
* No icon indicates the phone is in standby mode.
Indicates that a text message or voice mail has been received
In Vibrate or Vib1+Ring or Vib2+Ring mode
The Vibrate mode is selected.
When the ringer type is ‘Silent’ or ‘Light’ or when the ringer volume is ‘Off’.
In Alarm mode (alarm clock is set).
Roaming
The phone is outside of its home service area.
Shows your current battery charge strength. (Icon shown fully charged)
Using the Battery Pack
Charge the battery fully before the initial use of the phone.
The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk and standby time when using the phone.
Installing the Battery
To install the battery, insert the bottom of the battery into the opening on the back of the phone. Then, push the battery down until the latch clicks.
Removing the Battery
Turn the power off. (If power is on, a loss of stored num- bers and messages may occur.)
Push the latch upwards to detach the battery.
release latch
slot
Chapter 1
Getting Started
16 | 17 |