NOTE : Selecting Vibrate mode will allow you to main- tain your phone under Vibrate Mode even when you turn it off and turn it back on.
Adjusting Lock Function
Used to prevent other persons from using your phone without your permission.
There are two ways to enable the Lock Function - with one key and by using the Menu.
1)In standby mode, to activate the lock mode quickly,
press the 
(for 3 seconds).
NOTE : To cancel the Lock Mode, Press Soft Key 2 Cncl, then enter your password (4 digits). Default value is ‘0000’.
Call Waiting
Your cellular service provider may offer a call waiting function. While a call is in progress, you may hear two beeps indicating another incoming call. When call wait- ing is enabled, you may put the active call on hold while you answer the other incoming call. Check with your service provider for information about this function.
1)Press 
to receive a waiting call.
2)Press 
again to switch between calls.
Mute
The mute function prevents the other party from hearing your voice, but allows you to hear the other party.
1)Press Soft Key 1 Menu and 
during a call.
2)To cancel Mute, press Soft Key 1 Menu and 
again.
Redialing Calls
1)Press 
to redial the last dialled number(s) in Call History.
You can also dial any of the last 60 Missed/Received/ Dialed numbers stored in the Call History list
Speed Dialing
Speed dialing is a convenient feature, which allows you to make phone calls quickly and easily. Your phone recalls the phone number from your personal directory, displays it briefly and then dials it.
To use Speed Dial register a phone number first (refer to page 33).
1)Enter memory location number 1 to 99 .
2)Press 
.
3)To end the call, Press 
.
Chapter 2
Basic Functions
24 | 25 |