LG Electronics 34E, 186, 100 manual Attendant Operation, System Greetings, Attendant Clock Set

●aria 186/ 100/ 34E - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE

Wake-up Call

Button Procedures

To register wake-up call,

●Press TRANS/PGM button.

●Dial 4 1

●Dial the station range. In case of one station, dial the station number twice.

●	After hearing confirmation tone, enter 4-digit wake-up time (HHmm) in 24-hour mode.
	(HH= 00~23, mm= 00~59)
●	Press HOLD/SAVE button for one-day, # and HOLD/SAVE button for `until canceled`.

To cancel wake-up call,

●Press TRANS/PGM button.

●Dial 4 2 (Confirmation tone is heard and MON button is lighting.)

●Dial the station range to be canceled.

●Press HOLD/SAVE button. (MON button will be extinguished.)

System Greetings

It provides announcements for Hunt service (UCD/Circular/Terminal) or DISA and only the system attendant can record this message.

Button Procedures

●Press TRANS/PGM button.

●Dial # 4.

●For DVU, dial 0 1 for announce1, dial 0 2 for announce 2, or 0 3 for announce 3. (Announcement 3 is played back when the called party is busy.)

●For EDVU, you have 31 (01~31) system greetings;

1~9 : for Hunt or company information with DISA 10 : for Invalid message

11 : for Time-out message

12 : for Try again message

13 : for Transfer to attendant message

14 : for Leave message

15 : for Record message

16 : for Enter authorization message

17 : for MOH message

18 : for Busy message

20 : for STA off-net announcement message

Attendant Operation

●Press # button or * (to record with external MOH) button after hearing the message.

●Record your greeting and hang up to finish the recording.

●To delete, press DND/FWD button while the message is played.

Attendant Clock Set

This feature allows the attendant to set the Time/Date without entering Admin Programming.

Button Procedure

●Press TRANS/PGM button.

●Dial # 1.

●Enter Date + Time. Enter as YYMMDDHHmm.

(YY= Year 00~99, MM= Month 01~12, DD= Date 01~31, HH= Hour 00~23, mm= minute 00~59) If there is no need to change date or time, press * key. (YYMMDD + * or * + HHmm)

●Press HOLD/SAVE button.

26