Pantech PG - 3600V manual CB Msg, Voice Mail, Saving Memory Specifies where received e-mails

•Username: The ID used to sign in to the E-mail server.

•Password: The password used to sign in to the E-mail server.

•Data Connection: The Internet data connection used to connect to the E-mail server:

•GPRS: Select this item then press the [Edit] Soft key to edit the APN Name, User ID, and Password.

•CSD: Select this item then press the [Edit] Soft key to edit the Dial Number, User ID, Password, and Modem Type (ISDN or Analog).

• Incoming Server: The POP3 server used to receive E-mail.

•Outgoing Server: The SMTP server used to send E mail.

•SMTP Authentication: If set to Yes then the username and password are used to authenticate your identity when you send e-mail messages using the SMTP protocol. Press the [l] or [r] scroll key to select either Yes or No.

•Save Message: Specifies whether e-mail messages are saved in the Sent Box after they are sent. Press the [l] or [r] scroll key to select either On or Off.

•Saving Memory: Specifies where received e-mails

Messages

are stored. Press the [l] or [r] scroll key to select between the following:

Internal Memory: Saves the files, which are attached to

E-mail, in the phone. However, only certain file types can be saved.

External Memory: Saves the files, which are attached to

E-mail, in the phone memory. In this case, all file types can be saved in the Attachments folder.

CB Msg.

Before you can receive Cell Broadcast (CB) messages, you must configure the following settings.

•Language: Specifies the language of CB messages your phone will receive.

• Info. Subjects: Specifies the subject of CB messages your phone will receive:

Standard: Predefined subject list.

Custom: User-defined subject list.

•Receive: Press the [l] or [r] scroll key to specify whether or not you want to receive CB messages.

Voice Mail

Before you can access the voice mailbox provided by your network service provider, you must configure the following

51