Kyocera M1000 manual Volume control, Hold Calls, Speed dial, Touch Dialing, Call Features

3CALL FEATURES

This chapter describes call features such as volume, holding calls, speed dialing and other features.

Volume control

You have several ways to control the volume of your phone.

Adjust volume during a call

To adjust the earpiece volume during a call, press the Volume key up or down.

Use the speakerphone

Your phone has a built-in speakerphone. To turn on the speakerphone, press the Speakerphone key.

The speakerphone icon appears on the home screen when the speakerphone is on.

To turn off the speakerphone, press the Speakerphone key.

Note: If you press the Speakerphone key during an incoming call, you answer the call.

Silence an incoming call

To silence the phone without answering the call, press the End key or select Silence.

To silence the phone and answer the call, press the End key and then press the Send key.

Note: In the absence of voicemail, this feature drops the call.

Hold Calls

The Hold Call feature allows you to place incoming calls on hold until you are ready to answer them. See “Hold Call” on page 59.

Speed dial

Use the speed dial feature to assign a one- or two- digit shortcut to a contact. Before you can use speed dialing, you must save a phone number as a contact and assign a speed dial location to it. See “Contact number” on page 30.

To call a contact that has a speed dial location:

1.Enter the one- or two-digit speed dial location.

2.Press the Send key.

1-Touch Dialing

The 1-touch dialing feature is the fastest way to speed dial a contact that has a speed dial location. See “1-Touch Dialing” on page 60.

14 Volume control