Kyocera M1000 manual Network

Com Port Speed

The Com Port Speed sets the data rate at which your phone connects to a laptop or PC, or at which it sends and receives over-the-air text messages. Select Menu > Settings > Accessories > Com Port Speed and your desired speed.

There may be a higher charge for making calls using high-speed data in areas where 1X service is available. Check with your service provider for details.

TTY Device

You can connect the phone to a TTY device for the hearing impaired.

Note: Enable TTY only when using the phone with a TTY device.

1.Connect the TTY device to the phone.

2.Select Menu > Settings > Accessories > TTY Device (or enter ##889 from the home screen and select TTY) > OK > TTY On.

T-coil Hearing Aid

You can use your phone with a T-coil Hearing Aid device. Select Settings > Accessories > T-coil Hearing Aid > OK > Enabled.

Note: Enable T-coil Hearing Aid only when using the phone with a T-coil Hearing Aid device.

Network

Data and fax calls

Your phone may be able to receive certain data or faxes, depending on the system sending the information. You cannot receive voice calls while the phone is in data/fax mode.

To receive data or faxes, you must connect the phone to a laptop or PC and switch the phone from voice mode to data/fax mode.

Note: To purchase a cable,

visit www.kyocera-wireless.com/store. To enable data/fax mode, select Menu > Settings > Network > Data/Fax Calls and one of the following:

•Voice Only turns data/fax mode off.

•Fax, next call or Data, next call sets the phone to data/fax mode for the next incoming call or the next ten minutes.

•Fax, until off or Data, until off sets the phone to data/fax mode until the phone is turned off.

Privacy Alert

You can set your phone to alert you when enhanced digital CDMA privacy is lost or regained. Select Menu > Settings > Network > Privacy Alert > Enabled.

User Guide 63