Kyocera M1000 manual Add Voice Dial, Erase Voice Dial, Voice Training, Voice Wake-Up, Voice Answer

Add Voice Dial

You can add a new voice dial to your phone.

1.Select Menu > Settings > My Phone > Voice Features > Add Voice Dial.

2.At the voice prompt, say a name.

3.At the voice prompt, repeat the name.

4.Select one of the following:

–Add New creates a new contact.

–Add to existing adds the voice tag to an existing contact.

Erase Voice Dial

You can erase all existing voice dial tags from your phone. Select Menu > Settings >

My Phone > Voice Features >

Erase Voice Dial > Yes.

Voice Training

If you phone is having trouble recognizing your voice, you can train with the Yes, No, and Wake up commands. Select Menu > Settings >

My Phone > Voice Features > Voice Training > OK > Train All or the item you want to train. Follow the prompts for each word until training is complete.

Voice Wake-Up

You can set your phone to make a call using a hands-free accessory.

Note: Voice Wake-up does not work with keyguard active.

Enable voice wake-up

Select Menu > Settings > My Phone > Voice Features > Voice Wake-Up >

With accessory to enable calls with an accessory.

Use voice wake-up

To wake up the phone:

1.Say “Wake Up” and listen for a tone.

2.Say “Wake Up” again until you hear two tones.

If the phone does not recognize your Wake Up command, see “Voice Training” on page 61.

Voice Answer

You can set your phone to answer a call automatically when using a hands-free accessory.

Enable voice answer

Select Menu > Settings > My Phone > Voice Features > Voice Answer > Enabled to enable answering calls with an accessory.

To use the voice answer feature, you must have the Auto-Answerfeature (see “Auto-Answer” on page 62) disabled and the phone set to Normal Sounds (see “Silent Mode” on page 55).

Use voice answer

When you receive an incoming call, the phone prompts “Incoming call, answer?” or “Incoming roam call, answer?” If the caller is recognized as a contact entry in your phone, the phone prompts “Incoming call from (Name), answer?” Say “Yes” or press any key except the End key to answer.

User Guide 61