Kyocera KX5 manual Erasing messages, Reading the message, Setting message alerts, Symbol

Note: If you receive a new message while you are reading a message, the one you are reading will be replaced by the new one. You can find the older message in the InBox:

•Select Menu → Messages → InBox.

If you see the			symbol
1.	Select Menu → Messages → InBox. A list of all
	your received messages appears.
	–	indicates an “Urgent” message.
2.	Scroll through the list of messages and press
		to read one.

Reading the message

The options available to you may vary. Check with your service provider.

Note: Sounds embedded in text messages will not play if the phone is set to Silence All mode.

1.If the text message is long, press down to view the entire message.

2.When you are finished, you can Reply to the sender, Play the sound embedded in the message, Erase the message, Save the message to your Saved folder, or set additional Options for the message:

–Erase the message.

–Lock Msg to protect the message from being accidentally deleted.

–Forward the message.

–Reply with Copy to reply to the message with a copy of the original attached.

–Save Message to save the message.

–Save as QuickText to save the text from the message as QuickText, which you can insert into other messages. Graphics and sound are not saved as part of QuickText.(For more about QuickText, see page 52.)

–View Sender information.

3.Select Done.

Note: The symbol indicates that a graphic did not come through. It may be too large or incorrectly formatted.

Setting message alerts

You can set your phone to alert you of incoming text messages or pages. For more information, see “Setting message alerts” on page 39.

Erasing messages

It is a good idea to erase old messages to free up memory in your phone.

You have the option of erasing text messages and pages as you send or read them, erasing them one at a time from the list in the OutBox or InBox, or erasing them all at once.

50 Sending and Receiving Text Messages