Kyocera S2300 manual Security, Enable Auto-Answer, Enable Any Key, Lock Phone

– Answer Using Voice Answer

When you receive an incoming call, the phone prompts “Incoming call, answer?” With the caller recognized as a contact entry in your phone, the phone prompts “Incoming call from (Name), answer?” Do one of the following:

•Say “Yes” or press any key except the End key to answer the call.

•Say “No” or press the End key to ignore the call.

•Remain silent. The voice alert repeats twice and the phone rings once before returning to the home screen.

Use Voice Training

If your phone has trouble recognizing your voice, you can train your phone to recognize your specific voice for numbers.

1.From Voice Training, read the message and select OK > Train Numbers > OK.

2.Follow the prompts for each number until training is complete.

Note: You must read the numbers digit by digit for voice training to work.

Enable Auto-Answer

From Auto Answer, select After 5 Seconds. The phone automatically answers after five seconds with a headset attached.

Enable Any Key

From Any Key, select one of the following:

•Any Key Mute to silence calls when you press any key except for the Send or Speakerphone key.

•Any Key Answer to answer calls when you press any key except for the End, Back, or Navigation key.

Security

This section describes the security features on your phone. You can adjust these features to prevent access to your personal information. All security features are shielded by a four-digit lock code (typically 0000 or the last 4 digits of your phone number).

Lock Phone

Set Lock Phone

With your phone locked, you can call only emergency numbers or Virgin Mobile USA’s customer service number. You can still receive incoming calls.

1.From Security, enter your four-digit lock code.

2.Select Lock Phone > OK and one of the following:

–On Power Up locks the phone every time you turn it on.

–Now locks the phone immediately.

User Guide 65